unarchive In The Box of 4.5180 keyboard_arrow_down
- 2 - 5587 36mm Sway Bar Bushings
- 1 - 9.11108 Formula 5 Prelube Tubes
- 1 - Installation Instructions # 17039
add_shopping_cart Suggested Parts 2keyboard_arrow_down
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
3 - 5ML High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 4.5180 | Front Sway Bar Bushings - 36 mm | Ford Excursion
- 5 Star (34)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 4.5180
starstarstarstarstar" Review 2 Years Later "
Held up well. Improved ride quality.
verified_user Verified Buyer - Brent Prise - . Energy Suspension 4.5180 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
No problems in last two years. Still handles great!!!
verified_user Verified Buyer - David Baumgartner - . Energy Suspension 4.5180 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
The sway bar bushings have been working very well and I no longer have clunk that the old bushings were making.
verified_user Verified Buyer - Robert W Clouse - . Energy Suspension 4.5180 - 5 out of 5starstarstarstarstar" Great "
Easy install.
verified_user Verified Buyer - brandon fox - . Energy Suspension 4.5180 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Do you sell the brackets for part number 4.5180?
- Answer:
- No, we just have the bushings, not the brackets for part number 4.5180.
- Question:
- Is there a certain grease you recommend using for part number 4.5180?
- Answer:
- Yes, any type of marine grade grease will be the best. You can actually get that through us here at https://www.suspension.com/9.11110
