unarchive In The Box of 4.5187 keyboard_arrow_down
- 2 5764 Rear 30mm bushings
- 8 4902 Endlink bushings
- 4 15.10.342.39 Sleeves (0.687x0.500x1.250")
- 4 15.03.36.39 Washers (1.750x0.500x0.108")
- 4 15.05.48.40 Bolts (12mm x 65mm)
- 4 15.07.16.40 Nuts (12mm nylock)
- 1 17073 Instruction Sheet
- 2 9.11108 Grease.
add_shopping_cart Suggested Parts 3keyboard_arrow_down
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 4.5187 | Sway Bar and Endlink Bushings - 30mm | Ford F250 99-04
- 5 Star (7)
- 4 Star (1)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 4.5187
starstarstarstarstar" Perfect Fit, reasonable cost "
Just what was needed and easy to replace on 2000 F250.verified_user Verified Buyer - Shelley M. McKenzie - . Energy Suspension 4.5187 - 5 out of 5
starstarstarstarstar" Review 1 Year Later "
Good fit.verified_user Verified Buyer - Gary Pate - . Energy Suspension 4.5187 - 5 out of 5
starstarstarstarstar" Fit as advertised "
Great parts - a definite upgrade over the OEM. Just make sure to buy extra lube.verified_user Verified Buyer - Duane Bryson - . Energy Suspension 4.5187 - 5 out of 5
starstarstarstarstar" Great product to replace the soft factory bushings "
Great product and very affordable. The install was easy until I got to the drivers side where the factory sway bar bolt was located between the frame rail and the gas tank..after an hour with a 4" cutting wheel, a small torch and small blood lose I won the battle. Installing the Energy Suspension kit was easy. Some tips... do one side at a time so that the sway bar doesn't fall forward and break the ABS sensor on the differential. Also use a small torch to remove the factory bushings. Once they get hot they practically fall out.verified_user Verified Buyer - Biron Incorporated - . Energy Suspension 4.5187 - 5 out of 5