unarchive In The Box of 5.18105 keyboard_arrow_down
- Chrysler front control arm bushing set:
- 4 - 15.02.04.39 (D shell)
- 4 - 3203 upper control arm bushing
- 4 - 15.10.114.39 (.708O.D. x .576I.D. x 1.690" sleeve)
- 4 - 15.03.32.39 embossed washer 1-3/8" O.D.
- 4 - 15.03.33.39 embossed washer 1-1/8" O.D.
- 1 - 17019 installation instructions
- 1 - 17043 installation instructions
- Front strut rod bushing set:
- 4 - 7011 strut rod bushing
- 2 - 15.10.201.39 (3/4O.D. x 5/8I.D. x 1-13/16" sleeve)
- Rear spring and shackle bushing set:
- 8 - 2026 shackle bushing
- Note: Main eye bushing use the following parts according to model
- 2 - 15.10.14.39 (7/8O.D. x 5/8I.D. x 3-1/8" main eye sleeve)
- For 426 and 440 models
- 4 - 2025 main eye bushing
- Other than 426 and 440 models
- 4 - 2024 main eye bushing
- 1 - 17040 installation instructions
- Lower control arm bump stop set:
- 2 - 6032 bump stop
- 2 - 15.07.01.40 (3/8"-16 nut)
- Tie-rod boot cover set:
- 4 - 13001 tie-rod boot
- Front endlink bushing set:
- 8 - 4806 endlink grommet
- 8 - 15.03.01.39 (cupped washer)
- 2 - 15.07.01.40 (3/8?-16 nut)
- For 1965-69 B-body vehicles
- 2 - 15.10.23.39 (9/16O.D. x 3/8I.D. x 2.90" sleeve)
- 2 - 15.05.04.39 (3/8?-16 x 7? bolt)
- For 1970-72 E-body vehicles
- 2 - 15.10.22.39 (9/16O.D. x 3/8I.D. x 1.650" sleeve)
- 2 - 15.05.02.39 (3/8?-16 x 5-1/2" bolt)
- Grease:
- 1 - 9-11101 grease tub
- 1 - 9-11102 grease packet
add_shopping_cart Suggested Parts 9keyboard_arrow_down
Not Included in the Hyperflex Kit
Not Included in the Hyperflex Kit
7/8 Inch, 70-72 B Body and 70-74 E Body
15/16 Inch, 70-72 B Body and 70-74 E Body
7/8 Inch, 65-69 B Body
15/16 Inch, 65-69 B Body
71-76 Charger / Coronet, 70-74 Challenger / Barracuda, 89-70 Superbee, Charger, Coronet (318 400 and 440 models)
3 - 5ML High Performance Grease by Energy
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $271.02
Warranty: Lifetime Warranty
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 5.18105 | Complete Suspension Bushing Kit | Dodge Charger 65-72
- 5 Star (5)
-
-
- 83%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 17%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 5.18105
starstarstarstar_borderstar_border" Outstanding! "
Only the finest will do for my 1970 Dodge Charger and these hit the nail on the head. Overly impressed with the fit and function!
verified_user Verified Buyer - Christopher Eidem - . Energy Suspension 5.18105 - 3 out of 5starstarstarstarstar" Outstanding! "
Only the finest will do for my 1970 Dodge Charger and these hit the nail on the head. Overly impressed with the fit and function!
verified_user Verified Buyer - Christopher Eidem - . Energy Suspension 5.18105 - 5 out of 5starstarstarstarstar" Excellent quality and fit "
What a difference. This turned a 45 year old suspension into something close to a new car. Tighter response, way less jumpy and responds much quicker now. Highly recommend this upgrade.
verified_user Verified Buyer - Shawn Isaac - . Energy Suspension 5.18105 - 5 out of 5starstarstarstarstar" Excellent quality and fit "
What a difference. This turned a 45 year old suspension into something close to a new car. Tighter response, way less jumpy and responds much quicker now. Highly recommend this upgrade.
verified_user Verified Buyer - Shawn Isaac - . Energy Suspension 5.18105 - 5 out of 5compare_arrows Compare with Similar Parts
($52.51) more expensive
- star_borderstar_borderstar_borderstar_borderstar_border
- Bushing Material: Polyurethane
question_answer Customer Questions and Answers
- Question:
- I need everything so which part numbers do i need for complete kit please?
- Answer:
- The 42001 kit will include the Front Control Arm Bushings,Front Strut Arm Bushings, Rear Spring and Shackle Bushings, Front Sway Bar Endlinks, Front Lower Control Arm Bump Stops, Torsion Bar Dust Boots,and the Front Tie Rod Dust Boots x 2.
