unarchive In The Box of 5.5134 keyboard_arrow_down
- 2 - 5337 - 7/8" 22mm Grease-able Sway Bar Bushings
- 20 - 15.03.41.39 (.688 O.D. X .312 I.D. X .080)
- 2 - 15.12.06.39 - Multi-bracket Grease-able Assembly
- 2 - 15.08.34.39 - Sway BAR Bracket RS & LS
- 10 - 15.05.24.39 - (5/16 - 24 X 1" BOLT)
- 10 - 15.07.08.40 - (5/16 - 24 Nylon Insert Nut Silver)
- 1 - 17254 - Instructions
add_shopping_cart Suggested Parts 4keyboard_arrow_down
The endlinks are the other main connection between your sway bar and your vehicle. Make sure you replace the endlinks at the same to to receive the maximum handling benefit from the new sway bar bushings.
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
question_answer Ask us a Question
Energy Suspension Sway Bar BushingsEnergy Suspension Hyperflex Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty RubberA sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for Front Sway Bar Bushings with Adapters - 22.22mm | Dart
- 5 Star (4)
- 4 Star (2)
- 3 Star (1)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 5.5134
starstarstarstarstar_border" Good "
Instruction not clear/ correct for 69 b body. Possibly due to variations in the K member from plant to plant and model to model.\n I did get it to work by rotating the base plate until it was parallel with sway bar and drilling 2 new holes.verified_user Verified Buyer - Steven strohm - . Energy Suspension 5.5134 - 4 out of 5
starstarstarstarstar_border" Review 1 Year Later "
The instructions werent accurate for the 72 down K-member. It took awhile to figure out how the brackets needed to be installed. I know there are differences in how the Ks were made but it seems as though the brackets are too far to the outside. The bushings are partially on the curve of the sway bar at the ends. The car is still being built so I dont know if this is going to be an issue or not. The parts themselves look to be high quality though.verified_user Verified Buyer - darren burrichter - . Energy Suspension 5.5134 - 4 out of 5
starstarstarstarstar" very good "
No problem installing parts fit was greatverified_user Verified Buyer - Robbie Downs - . Energy Suspension 5.5134 - 5 out of 5
starstarstarstar_borderstar_border" Review 1 Year Later "
The instructions werent accurate for the 72 down K-member. It took awhile to figure out how the brackets needed to be installed. I know there are differences in how the Ks were made but it seems as though the brackets are too far to the outside. The bushings are partially on the curve of the sway bar at the ends. The car is still being built so I dont know if this is going to be an issue or not. The parts themselves look to be high quality though.verified_user Verified Buyer - darren burrichter - . Energy Suspension 5.5134 - 3 out of 5
compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Will I need to drill a hole in my K member to install the 5.5134 on my 67 Coronet?
- I am showing you will have to drill a 5/16