unarchive In The Box of 5.7116 keyboard_arrow_down
- 2 of 7140
- 2 of 15.10.663.39 (1.00 x .56 x 1.63)
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Track Arm Bushings
Track arms, also known as panhard rods, are designed to enhance driver control and safety while cornering through several tasks: Keeping your suspension centered, reducing body roll, and increasing driver control. Now, even with the track arm installed your suspension can shift while you corner. The amount of shifting that occurs depends largely on the quality of bushings you have installed for your track arm.
OE track arm bushings are most commonly made of soft rubber. Rubber, while able to absorb a great deal of vibrations from the road, simply flexes too much to be a decent material for track arm bushings. Energy Suspension makes all of their track arm bushings out of Hyperflex polyurethane, a material that not only offers better performance than rubber, it'll also last much longer. Capable of withstanding great amounts of heat, pressure, and road contamination, these Hyperflex bushings are guaranteed to outlast and outperform the OE. Now, due to polyurethane's firmer nature, there is a good chance that your NVH may increase slightly once these bushings are installed. But, the increase in your control and safety while cornering is well worth it. Plus, Energy Suspension covers all of their track arm bushings with a two-year warranty handled in-house here at DST.
Product Reviews for Front Track Arm Bar Bushings - Dodge Ram 2500 - 5.7116
- 5 Star (26)
-
-
- 87%
-
- 4 Star (3)
-
-
- 10%
-
- 3 Star (1)
-
-
- 3%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 5.7116
starstarstarstarstar" Quality "
Good fitment.
verified_user Verified Buyer - Eugene Lentz - . Energy Suspension 5.7116 - 5 out of 5starstarstarstarstar" 100 "
Truck had death wobble. Changed the track bar bushings. It made the steering nice and tight again. Feels like a new truck. Id definitely recommend.
verified_user Verified Buyer - Rodd Graydon - . Energy Suspension 5.7116 - 5 out of 5starstarstarstarstar" Perfect fit. 2006 Dodge Ram 2500 "
Solved my death wobble issue. Easy to install on the track bar. The bar itself isnt as easy, but the bushings were easy to install with a press. They even provide grease.
verified_user Verified Buyer - Lorenzo Schiaffino - . Energy Suspension 5.7116 - 5 out of 5starstarstarstarstar" Satisfied. Cheaper than buying the track bar. "
I would buy again. I have 1989 Chevy truck k1500 that Im replacing the whole front end.
verified_user Verified Buyer - Kenneth Nottingham - . Energy Suspension 5.7116 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Is kit 5.7116 a stock replacement part for a 2013 ram 2500?
- Answer:
- Yes, kit 5.7116 will replace your OEM stock parts.
- Question:
- Will part number 5.7116 fit my 2014 ram 2500 4wd?
- Answer:
- No, part number 5.7116 will not fit the 2014 ram 2500 4wd.
- Question:
- I purchased kit number 5.7116, but it seems like the sleeves I have are to large to fit into the 7141 bushing. Did I get the wrong bushing in my kit?
- Answer:
- The 5.7116 should have 2 of 7140 stamped bushings and 2 of 15.10.663.39 sleeves (1.00 x .56 x 1.63). It seems that you have the wrong bushing in your kit, and you should get with your original dealer to be able to get this issue resolved.
- Question:
- what bolt size are these set up to take?
- Answer:
- this is set to take a 9/16 bolt
- Question:
- Does part number 5.7116 fit my 2009 Dodge ram 3500 Mega Cab 4WD solid front axle?
- Answer:
- No, part number 5.7116 does not fit the 009 Dodge ram 3500 Mega Cab 4WD solid front axle.
- Question:
- How many bushings do you need to replace in the track bar is it 2 or 4 for a 2004 Dodge 3500 Ram Dually 4X4?
- Answer:
- You will need to get one kit since they come in a set of two. The one kit will replace all the bushings for the track bar.
- Question:
- Does part number 5.7116 come with 2 bushings?
- Answer:
- Yes, part number 5.7116 comes with 2 bushings.
- Question:
- Should part number 5.7116 come with 1 or 2 bushings?
- Answer:
- Part number 5.7116 will come with 2 bushings.
- Question:
- Does part number 5.7116 come with 2 bushings like shown in the picture or does it only come with 1?
- Answer:
- Part number 5.7116 will come with 2 bushings like shown in the picture.
- Question:
- What is the ID of the sleeve?
- Answer:
- The inner sleeve in part number 5.7116 is 1.00 od x .56 id x 1.63 l.
