unarchive In The Box of 8.10101 keyboard_arrow_down
- 1 - Main Steering Rack Bushing
- 2 - 10033 - Steering Rack Bushing Halves
- 2 - 10032 - Steering Rack Bushing Halves
- 1 - Center Metal Sleeve for 10033
- 1 - Center Metal Sleeve for 10032
- 1 - Outer Metal Washer
- 1 - Installation Intructions - #17302
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Rack and Pinion Bushings 1995-2000 Tacoma 4WD
Polyurethane Rack and Pinion Bushings from Energy Suspension will tighten the steering of your 95-00 Toyota Tacoma and last much longer than the original bushings. Rubber steering rack bushings have a tendancy to wear down and cause the steering wheel to feel loose, especially with hard driving, but polyurethane bushings will firm up that connection and last the life of your vehicle.


Source of Sloppy Steering
Your steering wheel controls the direction of your wheels by way of the steering rack and pinion. The original bushings that hold the rack and pinion in place are made of rubber to absorb vibration from the road but as they flex and bend the bushings begin to wear out and allow the rack and pinion to become loose. Besides everyday wear, rubber bushings can crack or degrade with prolonged exposure to heat, motor chemicals, and road grime. This can cause some clunking and clicking noises when you turn and jerkiness in your steering as the gears of the rack and pinion become misaligned.
Whether you're taking your Tacoma down to the river bank or around downtown Dallas you want to know that your steering is going to respond as it should.
Tighten Steering, Increase Response
If you want to remedy a loose steering rack then Energy Suspension's Rack and Pinion Bushings will replace those old rubber bushings that are no longer holding your steering components in place. This will eliminate the loose feeling in your steering wheel and keep the pinion aligned with the teeth of the rack so your steering is smooth and responsive.
These polyurethane rack and pinion bushings last longer than rubber since they don't flex and bend in the same way. Poly is also immune to the elements that will break down rubber bushings and cause them to crack or rot right off of your Toyota. Suspension.com covers these bushings with our exclusive lifetime warranty which is handled in house by our exceptional customer service staff.


Product Reviews for 8.10101 | Rack and Pinion Bushings | 1995-2000 Toyota Tacoma 4WD
- 5 Star (15)
-
-
- 79%
-
- 4 Star (2)
-
-
- 11%
-
- 3 Star (2)
-
-
- 11%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 8.10101
starstarstarstarstar" Review 2 Years Later "
Still holding up....better than the original.
verified_user Verified Buyer - Lerbert Ancheta - . Energy Suspension 8.10101 - 5 out of 5starstarstarstarstar_border" Great except for sleeve size "
Installed these this weekend & these bushings do a good job of firming everything up once installed. As the other reviews mention, be sure to have a good 9/16 metal drilling bit on hand for the center bushing sleeve before trying to install, or be prepared for some cussing & time wasted trying to make it work. Most bit sets have a 1/2 bit as the largest, and Lowes was out of single 9/16 bits (at $15.99, by the way), so spent lots of time trying to ream out with my existing 1/2 bit & a round file.\n\nSince lots of people have pointed out this issue, it is surprising that Energy Suspension hasnt just found the correct sized sleeve to include in the kit!
verified_user Verified Buyer - Chris - . Energy Suspension 8.10101 - 4 out of 5starstarstarstar_borderstar_border" Great except for sleeve size "
Installed these this weekend & these bushings do a good job of firming everything up once installed. As the other reviews mention, be sure to have a good 9/16 metal drilling bit on hand for the center bushing sleeve before trying to install, or be prepared for some cussing & time wasted trying to make it work. Most bit sets have a 1/2 bit as the largest, and Lowes was out of single 9/16 bits (at $15.99, by the way), so spent lots of time trying to ream out with my existing 1/2 bit & a round file.\n\nSince lots of people have pointed out this issue, it is surprising that Energy Suspension hasnt just found the correct sized sleeve to include in the kit!
verified_user Verified Buyer - Chris - . Energy Suspension 8.10101 - 3 out of 5starstarstarstarstar" Review 1 Year Later "
Good product, excellent fitting instructions found on the internet as well as some included with the bushings. Would definitely buy from you again.
verified_user Verified Buyer - phillip rossiter - . Energy Suspension 8.10101 - 5 out of 5compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- Do you offer a steering rack bushing kit for a 1997 5-lug Toyota Tacoma with RWD?
- Answer:
- Manufacturer: SuperPro Part Number: spf1836k Front Steering Rack and Pinion Mount Bushing - .Power Steering spf1836k fits these vehicles: Toyota 4Runner 4WD - 1995 thru 4WD - 2002 Toyota Hilux 2WD - 1995 thru 4WD - 2002 Toyota Landcruiser Pra ado 1995 thru 2002 Toyota Tacoma 2WD - 5 Lug - 1995 thru 4WD - 2004 Both RH and LH sides of rack Steering Rack and Pinion Mount Bushing - .Power Steering ...see more