unarchive In The Box of 8.3105 keyboard_arrow_down
- 4 - 3046 Bushings
- 2 - 9.11108 Formula 5 Prelube Tubes
- 1 - Installation Instructions # 17019
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.


The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.


Product Reviews for Front Control Arm Bushing Kit | Toyota Pickup 1986-1988
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 8.3105
starstarstarstarstar" Review 2 Years Later "
All of the parts I purchased have held up to quality standards and have not let me down in beating this truck mercilessly.
verified_user Verified Buyer - Nathan Chaffin - . Energy Suspension 8.3105 - 5 out of 5starstarstarstarstar" Big improvement and great fit. "
This is my second round after 12 yrs and 120k on a set of the red bushing after they became worn and weathered. The fit was perfect and I got back the solid smooth feel I had on the first set.
verified_user Verified Buyer - don spencer - . Energy Suspension 8.3105 - 5 out of 5starstarstarstarstar" Very well made product.. "
Ordered the black polys for my upper and lower control arm bushings for my 86 Toyota 4runner.. While they were a pain to install, they were well worth it and it handles much better now.. The only complaint is that it should have come with a little more pre-lube, but other than that, shipping was fast and once I got the polys in it was easy from there and much cheaper than rubber bushings..
verified_user Verified Buyer - Eric Daniel Kleinberg - . Energy Suspension 8.3105 - 5 out of 5starstarstarstarstar" Excellent "
These A-Arm poly bushings fit perfectly, and made the 4runner handle tight, and like new again. Impressive, thanks for a good product!
verified_user Verified Buyer - Steve Bray - . Energy Suspension 8.3105 - 5 out of 5compare_arrows Compare with Similar Parts

($2.30) more expensive
- starstarstarstar_borderstar_border2
- Bushing Material: Polyurethane