unarchive In The Box of 8.3112 keyboard_arrow_down
- 2 - 3093 rear control arm bushings
- 2 - 3094 rear control arm bushings
- 2 - 15.10.241.39 0.750OD X 0.480ID X 2.530L
- 2 - 9.11108 5ml prelube
- 1 - 17019 Installation Instructions
add_shopping_cart Suggested Parts 1keyboard_arrow_down
Replace the front control arm bushings at the same time for the maximum benefit to your vehicle's handling.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 8.3112 | Rear Control Arm Bushing Kit | Toyota Supra 1982-1986
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 8.3112
starstarstarstarstar" Hard to fit, but good value for money. "
Overall impressions of the quality of the bush kit was very good although when compared to the superpro kit available I'd have to say their 2 piece split bush design is much easier to fit, and removes the use of the original bush shells. Also, the quality of instructions was quite poor, a nice color printed version would have been easier to follow as the black and white photocopied version was quit hard to read, and wasn't car specific. Also, your missing a trick with not doing subframe bushes for these cars. These would be a popular item if you could sell them a bit cheaper than the superpro kits.
verified_user Verified Buyer - neil walker - . Energy Suspension 8.3112 - 5 out of 5