unarchive In The Box of 8.3126 keyboard_arrow_down
- 4 of 2749 - Upper Control Arm Bushings
- 4 fo 2748 - Lower Control Arm Bushings
- 4 of 2747 - Lower Control Arm Bushings
- 4 of 15.10.602.39 - Upper Control Arm Sleeves - .813" x .563" x 1.945
- 4 of 15.10.413.39 - Lower Control Arm Sleeves - 1.000" x .640" x 2.950"
- 4 of 9.11108 - Grease Packets
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for Toyota Supra Front Control Arm Bushing Replacement Kit
- 5 Star (10)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 8.3126
starstarstarstarstar
Part fits perfect. Perfect time to replace with brand new camber bolts.
verified_user Verified Buyer - ruben Zapata - . Energy Suspension 8.3126 - 5 out of 5starstarstarstarstar" Amazing "
They are great!!! My car handles way better and there were no problem to install.
verified_user Verified Buyer - John Lopez - . Energy Suspension 8.3126 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
i currently do not own the car anymore. needless to say when i did.. ease of installation was great, car performed well along with many other suspension done to the car. cant complain about the price either!! great product!!
verified_user Verified Buyer - Derrick Maske - . Energy Suspension 8.3126 - 5 out of 5starstarstarstarstar" Everything ok, good parts "
Sorry, my english is not so good. All bushing parts works perfect and my 23 years old Supra has now the ok from the street-inspection office for the next 3 years. Thanks for your support.
verified_user Verified Buyer - Marco Wandeler - . Energy Suspension 8.3126 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Will I need to reuse the metal sleeves from my stock bushings with the 8.3126 kit?
- Answer:
- No, The 8.3126 kit will not require you to reuse your metal sleeves from your stock bushings.
- Question:
- UPPER AND LOWER Control arm Bushings? The title DOESNT SAY IF THE bushings are for the upper control arm or the lower control arm. I KNOW THEY ARE FOR THE FRONT OF THE VEHICLE, ARE THEY FOR THE UPPER OR LOWER CONTROL ARM?
- Answer:
The 8.3126 will cover the upper AND the lower control arms in one kit. You can view the installation instructions here to confirm that:
https://www.energysuspension.com/assets/files/pdf/17521.PDF
additionally, this image is exact to the contents of that kit and shows both the upper and lower arm bushings:
https://www.energysuspensionparts.com/prodimages/Energy_Suspension/ES83126R_lg.png
...see more
