unarchive In The Box of 8.3131 keyboard_arrow_down
- 2 of 3528 - Front Vertical Bushings
- 2 of 15.10.676.39 - Front Inner Metal Sleeve - 1.125" x .750" x 2.240"
- 2 of 15.02.51.39 - Front Outer Metal Shell - 2.375" x 2.135" x 1.187"
- 4 of 2914 - Rear Horizontal Bushings
- 2 of 15.10.360.39 - Rear Inner Sleeve
- 3 of 9.11108 - Grease Packets
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
8.3131 | Subaru BRZ | Front Control Arm Bushing Replacement Kit
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 8.3131 | Subaru BRZ | Front Control Arm Bushing Replacement Kit
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 8.3131
starstarstarstarstar" Good product, fast delivery "
Seem to perform very well, paired these with Megan racing ball joints and can feel an amazing difference in the overall handling, not easy to install but that was expected.
verified_user Verified Buyer - Patrick Bass - . Energy Suspension 8.3131 - 5 out of 5starstarstarstarstar" Great improvement to handling "
I had a professional shop install these on my Subaru Brz. Overall, these definitely improve handling. Turn in is sharper. Steering is much quicker with more feel. The steering is also a bit more weighted, which inspires more confidence on high speed turns. I would recommend this to anyone who wants better steering and handling out of their BRZ. No squeaks either, which is a good thing. The ride also did not suffer from the install of polyurethane bushings.
verified_user Verified Buyer - Suki S. - . Energy Suspension 8.3131 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Can I just purchase a 15.02.51.39 out of the 8.3131 kit? I purchased off Ebay and the kit is missing one of the 15.02.51.39.
- Answer:
- We do sell by just the piece, to start the process you will need to give us a call at 888-406-2330 or use the live chat button on this page to get in touch with a rep to help you further.