unarchive In The Box of 9.4102 keyboard_arrow_down
- 2 Complete Mount Assemblies
- 2 - 1001 Upper Mount Half with Metal Ring Molded In
- 2 - 1002 Lower Mount Half
- 2 - Center Metal Sleeve for 1001, 1002
- 4 - Outer Metal Washers for 1001, 1002
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Body to Frame Mount Bushings
Energy Suspension's Hyperflex polyurethane is a stronger material for a body to frame mount bushing. Polyurethane is able to handle the constant beating a body mount takes and is not vulnerable to road grime or UV rays. With Energy Suspension's body mounts, you can protect your body to frame attachment, and your smooth ride, for years to come.
Replacing the Faulty Rubber
O.E. Manufacturer's use soft rubber body mounts to attach a body and frame. Over time these bushings deteriorate due to wear and tear, UV rays or road grime. Once the rubber starts to fail, the attachment point is compromised and the bushing can literally just fall off. Without body to frame mount bushings, the smooth connection between your body and frame is gone and your smooth ride is gone with it. Now bumps and potholes will really put your seatbelt to work.
Product Reviews for
- 5 Star (44)
-
-
- 96%
-
- 4 Star (2)
-
-
- 4%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 9.4102
starstarstarstarstar" Review 1 Year Later "
Everything is good.
verified_user Verified Buyer - James Jackson - . Energy Suspension 9.4102 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
You were very helpful. You got me exactly what I asked for. Worked out great. But soon. After a few months the vehicle was totaled.
verified_user Verified Buyer - Rodney Rhodes - . Energy Suspension 9.4102 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
A good substitute working fine.
verified_user Verified Buyer - Sharon De Mille - . Energy Suspension 9.4102 - 5 out of 5starstarstarstarstar" excellant product "
These were installed in a 1936 Chevrolet Pick-up, restoration of the vehicle is not yet complete however these should work well.
verified_user Verified Buyer - Gerald A. Rodebush Sr. - . Energy Suspension 9.4102 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Will the 9.4102 fit for my 2011 Nissan Frontier?
- Answer:
- The 9.4102 is an universal part number that does not have a guaranteed fitment.
- Question:
- Are there any body mount bushing kits for the 1970 Cadillac Deville?
- Answer:
- There are no body mount bushing kits for 1970 Cadillac Deville, however you may try using the universal body mounts: 9.4102 or trying using the polyurethane pads if you or someone knows how to machine them, these can be found on our universal page: h https://www.suspension.com/universal-isolators.asp ...see more
- Question:
- I'm using the universal 9.4102 set and I was wondering if you can provide a general idea on how they go to together. I created the metal mounts and to know if I drill the hole the size of the metal center bushing? Thinker red part on top and thinner underneath?
- Answer:
- This kit has numbers stamped on each of the bushings 1001 is the upper mount half 1002 is the lower mount half. If you are using these as a body mount, then you will want the hole to be just a little bigger than the upper mounts metal ring.
- Question:
- Will these fit a 1997 Dodge Dakota 4wd single cab?
- Answer:
- Unfortunately, with universals, we cannot guarantee fitment since they are based on measurements. I do apologize for this inconvenience.
- Question:
- What is the durometer of part number 9.4102?
- Answer:
- Part number 9.4102 has a durometer of 85A.
- Question:
- Will part number 9.4102 fit my 1969 nova?
- Answer:
- Part number 9.4102 is a universal set, so there is no guaranteed direct fitment. You will need to measure your mounts and compare them with the specs of these mounts.
