• 9.8121 Universal Sway Bar End Links 98121

Universal Sway Bar End Links 98121

Part Number: 9.8121
Manufacturer: Energy Suspension


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $19.24

In Stock Ships Immediately

Universal Sway Bar Endlinks
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Universal Sway Bar End Links 9.8121

Universal A = 6 Inch
Universal Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.

Need a different size? Select from below.

Complete end link set includes: firm durometer polyurethane bushings, zinc plated 3/8" grade 5 bolts, "ny-lock" nuts and heavy gauge washers.

Vehicle must be on level ground (not jacked up) with wheels supporting it. Make sure stabilizer bar end eyelet (B) is parallel with the control arm (C). Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the original. Measure length of (A) and compare to the chart to find the correct set.

Image Length of 'A' Part Number
Energy Suspension 9.8106 Endlink Grommets Grommets Only
1 Inch Outer Diameter
3/8 Inch Inner Diameter
5/8 Inch Nipple Outer Diameter
Energy Suspension 9.8103 Endlink Grommets for Trucks Grommets Only
1.25 Inch Outer Diameter
7/16 Inch Inner Diameter
7/8 Inch Nipple Outer Diameter
Energy Suspension 9.8105 Endlink Grommets and Washers Grommets and Washers
1.125 Inch Outer Diameter
3/8 Inch Inner Diameter
11/16 Inch Nipple Outer Diameter
Energy Suspension 9.8122 2.55 Inch 9.8122
Energy Suspension 9.8120 3.25 Inch 9.8120
Energy Suspension 9.8123 3.575 Inch 9.8123
Energy Suspension 9.8125 3.925 Inch 9.8125
Energy Suspension 9.8117 4.175 Inch 9.8117
Energy Suspension 9.8118 4.45 Inch 9.8118
Energy Suspension 9.8119 4.915 Inch 9.8119
Energy Suspension 9.8124 5.115 Inch 9.8124
Energy Suspension 9.8149 5.775 Inch 9.8149
Energy Suspension 9.8121 6.00 Inch 9.8121
  • One Set Will Cover the Left and Right Side

Sway Bar Bushings Problem and Cure

  • 8 - Endlink Grommets
  • 8 - Endlink Outer Washers
  • 2 - Main Bolts
  • 2 - Nylock Nuts
  • 2 - Spacer Sleeves

Alternate Part Numbers for 9.8121
  • ENE-9.8121G
  • ENE-9.8121R
  • ENS-9-8121G
  • ENS-9-8121R
  • 98121G
  • 98121R

Energy Suspension 9.8121

Product Reviews for 9.8121

Energy Suspension 9.8121

5 out of 5 based on 10 user reviews. Write a Review

You make it easy parts went in easy no problem good job.
5 out of 5 - good parts
Paul Rodrigue - . Energy Suspension 9.8121
I may have told you wrong. I think the link bars are what we bought the red bushings for, not the sway bars. We had the change the bolt. I think they were to short. Maybe you could make some kind of chart thats on your web site so customer that are installing them for the first time, could take it and measure there car. This way they could order the correct size bolts. I think they will work fine. The car is not on the road yet but close. There is a chart on our Universal sway bar endlink pace that has the length from center to center of the upper and lower bushings. We do not have the bolt and sleeve length. There is a picture on that page that shows the dimension that is needed to insure you get the correct size. I you have any questions call 888-4062330 and ask any of our Customer Service agents to help you.
5 out of 5 - good product.
Mark Sarti - . Energy Suspension 9.8121
I did not understand the measurement system to order correct length. I order part that was too long. But the longer length allowed minor mods to make it work.
5 out of 5 - Good quality
Lewis C. Hoy - . Energy Suspension 9.8121
Installed and working great as of present. No issues. Worth the investment as the car handles better as well with additional poly parts that were purchased.
5 out of 5 - Review 2 Years Later
Parvin John - . Energy Suspension 9.8121
I have a 2010 F150 4X4. I kept replacing the end links with factory replacements. At $40 a piece they were getting expensive! After a month they would start knocking, or break in two! As a last resort I purchased these. I had my fingers crossed because they show no listing for a 2010 F150 SUPERCREW 4X4. I installed them today, and worked they work like they were made for the truck. Plus there is no more knocking and I am confident the fix is permanent! AWESOME PRODUCT!!!!!! ENERGY SUSPENSION IS A LIFE SAVER!
5 out of 5 - GREAT PRODUCT!!!!!!!!
charles van nest - . Energy Suspension 9.8121
Installed on my 2005 Toyota 4runner. Tightened up the suspension a lot and provided MUCH needed roll-over protection. Best DIY kit one can get for their 4th Gen 4runners!
5 out of 5 - A++
Ryan Liebscher - . Energy Suspension 9.8121
Everything met or exceeded my expectation. Measurement instructions were very helpful.
5 out of 5 - Good Quality
William Suski - . Energy Suspension 9.8121
This Kit will work on my Dodge 2007, 2500 2x4. No problem, J E Moore
5 out of 5 - Very Good
John Moore - . Energy Suspension 9.8121
Well my truck is here in Norway and my cheapest alternative locally for this part was well over $100.00. And forget buying these items from the Dealers who make the truck. The price is unbeatable and the quality is excellent. Shipping was fast.
5 out of 5 - Great
Allen Dean - . Energy Suspension 9.8121
I have installed them but I had to use the old bolts because the new ones are to short 8 1/2" and I needed 9" the spacing is ok. I couldn't return them because when I removed the old ones they were in bad condition and had to use the old bolts with the new bushings. I'm still looking for the 9" bolts. Thank you
5 out of 5
Silverio Machado - . Energy Suspension 9.8121

Customer Questions and Answers

What size of grommets that are on the part 9.8121?
The 9.8105 grommets are 11/8 od, 3/8 ID and nipple OD 11/16 and .725 thick or tall.