Universal Sway Bar End Links 9.8149

In The Box of 9.8149

8 - Endlink Grommets
8 - Endlink Outer Washers
2 - Main Bolts
2 - Nylock Nuts
2 - Spacer Sleeves

Warranty Information

Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

Ask us a Question

FitmentUniversal Sway Bar End Links 98149 9.8149 fits these vehicles:

Universal Sway Bar End Links thru Sway Bar End Links

Details

Universal Sway Bar Endlinks

Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Universal Sway Bar End Links 9.8149

Universal A = 5.775 Inch

Universal Sway Bar Bushings

Your vehicle's sway bar system will work at its maximum efficiency!
Replaces that original, short lived and too-soft rubber.
Easy to install with basic tools.
Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.

Need a different size? Select from below.

Complete end link set includes: firm durometer polyurethane bushings, zinc plated 3/8" grade 5 bolts, "ny-lock" nuts and heavy gauge washers. TO FIT/SELECT THE PROPER SET- Vehicle must be on level ground (not jacked up) with wheels supporting it. Make sure stabilizer bar end eyelet (B) is parallel with the control arm (C). Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the original. Measure length of (A) and compare to the chart to find the correct set.
Image	Length of 'A'	Part Number
	Grommets Only 1 Inch Outer Diameter 3/8 Inch Inner Diameter 5/8 Inch Nipple Outer Diameter	9.8106
	Grommets Only 1.25 Inch Outer Diameter 7/16 Inch Inner Diameter 7/8 Inch Nipple Outer Diameter	9.8103
	Grommets and Washers 1.125 Inch Outer Diameter 3/8 Inch Inner Diameter 11/16 Inch Nipple Outer Diameter	9.8105
	2.55 Inch	9.8122
	3.25 Inch	9.8120
	3.575 Inch	9.8123
	3.925 Inch	9.8125
	4.175 Inch	9.8117
	4.45 Inch	9.8118
	4.915 Inch	9.8119
	5.115 Inch	9.8124
	5.775 Inch	9.8149
	6.00 Inch	9.8121

Footnotes

One Set Will Cover the Left and Right Side

Energy Suspension Sway Bar Endlinks

While your sway bar is intended to maximize contact to the road, it can't accomplish this task on its own. Sway bar endlinks are just as important as the sway bar itself. Connecting your sway bar to the rest of the suspension, these endlinks allow the sway bar to perform its task. Should your endlinks wear down or fail completely, you will inevitably feel increased body roll while cornering.

Coverage and Performance

OE replacements will undoubtedly come with rubber bushings. While rubber can easily absorb vibrations from the road, it doesn't hold up for long. Crafted using Hyperflex polyurethane bushings and including a brand new set of hardware, Energy Suspension's endlinks are a significant upgrade over OE replacements. The Hyperflex polyurethane bushings are resistant to both chemicals and physical wear, increasing the endlink's durability and performance exponentially. Plus, Energy Suspension covers all of their endlinks with a two-year warranty handled in-house here at DST.

Product Reviews for Universal Sway Bar End Links 9.8149

5 Star (2)

: 100%

4 Star (0)

: 0%

3 Star (0)

: 0%

2 Star (0)

: 0%

1 Star (0)

: 0%

5 out of 5 based on 2 user reviews. Write a Review

" Review 2 Years Later "

Still doing their job as well as the day I installed them .... Great parts \n thanks \n G

Verified Buyer - Greg - July 16, 2016. Energy Suspension 9.8149 - 5 out of 5

Measured wrong when ordering these so they were too long, the next size down ended up being too short. Used the shorter sleeve from the other set with this set and they worked great!

Verified Buyer - Greg M - September 14, 2012. Energy Suspension 9.8149 - 5 out of 5

Fitment for 9.8149

Universal Sway Bar End Links

Customer Questions and Answers

Question:: Will part number 9.8149 fit my 2008 Trailblazer LT 4.2 4WD?
Answer:: Part number 9.8149 is a universal so you will need to measure your end link first to make sure the measurements match up.

Question:: What is the hardness of the bolts in the sway bar end link kits?
Answer:: Energy sway bar end link bolts are grade 5 or 6.

Question:: I just watched the video about universal parts. How can I get the measurements of the sway bar link bushings I need for my Subie DL 1988 wagon?
Answer:: The best way is to measure the links is between the center hole of the sway bar to the center hole of the control arm. You will also need to know what style end link you have after getting the length measured you can find all the options here at this s site https://www.suspension.com/universal-end-links.asp. You can also put the measurements you need on site and a part number in black will come up. ...see more

Ask a Question

Universal Sway Bar End Links 9.8149