Rear Bump Stops - Ford Excursion - 9.9155

  • 9.9155 360image 1
  • 9.9155 Rear Axle Bump Stops
  • 9.9155 Rear Axle Bump Stops
  • 9.9155 Rear Axle Bump Stops
  • 9.9155 Rear Axle Bump Stops
  • 9.9155 Rear Axle Bump Stops
  • 9.9155 360image large 1

Rear Axle Bump Stops

Manufacturer: Energy Suspension
Part Number: 9.9155

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $34.24

check_box In Stock check_box Ships Immediately


  • 2 - 6080 - Bump Stops sith Molded Metal Center
  • 2 - Nylock Nuts
  • 2 - Bolts
  • 4 - Metal Washers
  • 1 - Installation Instructions - #17168
  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentRear Axle Bump Stops 9.9155 fits these vehicles:
Details
Polyurethane Rear Bump Stops
Energy Suspension performance bump stops help cushion a collapsing suspension preventing bottoming out and expensive vehicle damage.

Rear Bump Stops - Ford Excursion - 9.9155

Polyurethane Rear Bump Stops
  • Helps prevent damaging and expensive suspension component contact!
  • Many feature a specially designed mechanical interlock a course threaded stud and strong nylon locking nut system.
  • Guaranteed to last longer and operate more efficiently than original rubber stops.
  • Made of Energys HYPER FLEX performance polyurethane to add performance and durability.
Footnotes
  • One Set Will Cover the Left and Right Side

Energy Suspension Bump Stops

Protect your Suspension

Energy Suspension's bump stops are simple but powerful things. Made of rugged Hyperflex polyurethane, these bump stops are designed to protect your suspension from serious impacts. Some vehicles come with bump stops pre-installed. However, these OE bump stops are usually made of rubber. While rubber is good for absorbing and re-directing impacts, it doesn't last long. Prone to cracking, rotting, and eventually falling away, rubber bump stops will end up leaving your suspension exposed. Hyperflex polyurethane, on the other hand, is extremely resistant to both road contaminants and physical wear. By replacing that rubber with Energy Suspension's Hyperflex polyurethane, you'll not only restore your protection, but it'll also be better than ever. In addition, Energy Suspension covers all of their bump stops with a two-year warranty handled in-house here at DST.

Energy Suspension Bump Stop box
Energy Suspension 9.9155

Product Reviews for Rear Bump Stops - Ford Excursion - 9.9155

5 Star (7)
88%
4 Star (0)
0%
3 Star (1)
12%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.9155

5 out of 5 based on 8 user reviews. Write a Review

S
verified_user

starstarstarstarstar" Review 2 Years Later "

Parts are great !!

verified_user Verified Buyer - - . Energy Suspension 9.9155 - 5 out of 5
C
verified_user

starstarstarstarstar" Great product "

When my factory ones fell off I knew it was time for a upgrade. These were super simple to install. I would recommend these to anyone looking to upgrade or to just replace the factory bump stops.The shipping was fast and arrived on time. Excellent communication with the seller.

verified_user Verified Buyer - - . Energy Suspension 9.9155 - 5 out of 5
B
verified_user

starstarstarstarstar" Fit well "

Fit well good quality. Looks like they will last!

verified_user Verified Buyer - - . Energy Suspension 9.9155 - 5 out of 5
J
verified_user

starstarstarstarstar" Review 2 Years Later "

Replaced Ford OEM parts that continues to fail. These required drilling one hole for the center screw but I havent replaced them and they still look like new.

verified_user Verified Buyer - - . Energy Suspension 9.9155 - 5 out of 5

question_answer Customer Questions and Answers


Question:
Do you have the specs for part number 9.9155?
Answer:
Here are those specs for part number 9.9155. They are 3-1/8 Inches Tall and 2-7/16 Inches Diameter .They are Designed to accept 3/8 Inch Diameter socket head bolt.