9.9488 | Universal Flange Bushing | 1.760 in. OD 5/8 in. ID

  • 9.9488 360image 1
  • 9.9488 Flange Type Bushing
  • 9.9488 Flange Type Bushing
  • 9.9488 Flange Type Bushing
  • 9.9488 Flange Type Bushing
  • 9.9488 Flange Type Bushing
  • 9.9488 360image large 1

Flange Type Bushing

Manufacturer: Energy Suspension
Part Number: 9.9488

Color: (?)
Black
Red

Exclusive for DST Customers: (?)
Free Lifetime Warranty Upgrade
Price: $24.33

check_box In Stock check_box Ships Immediately


  • 4 of 2233 - Flange Type Bushing
  • 2 of 15.10.106.39 - Metal Sleeve (.875" x .625 x 2.930)
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
FitmentFlange Type Bushing 9.9488 fits these vehicles:
Details
Polyurethane Link Bushings

9.9488 | Universal Flange Bushing | 1.760 in. OD 5/8 in. ID

Length Outer Diameter Length Fastener Bolt Diameter
65.09mm
2-9/16 Inches
44.45mm
1-3/4 Inches
74.61mm
2-15/16 Inches
15.88mm
5/8 Inch
Here is our complete list of universal bushings.
Made of superior HYPERFLEX polyurethane material for extreme durability. Fits many of the more common 4 Bar systems. These are typically found in hot rods, custom rods and many of the older American vehicles.

Suggested uses include:
  • control arms
  • track rods
  • 4 bar links
  • push/nerf bars
  • tire carrier racks
  • engine mounts
  • transmission mounts
Each Set Is 2 Complete Bushings
  • 4 bushings halves
  • 2 metal sleeves
Footnotes
  • No Footnotes From Energy Suspension

Energy Suspension Universal Flange Type Bushings

If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. Energy Suspension's polyurethane is an excellent material for bushings. Resistant to chemical, oils, and weathering, poly bushings are far more durable than rubber and will outperform any bushing out there. If you are in the market for universal flange type polyurethane bushings, you've come to the right place. If you are a fabricator needing a bushing to finish your design, this is the place to be. Or, if you've just come from your vehicle page and are needing a universal bushing, you're where you need to be. So if you are having an issue finding a bushing for your specific needs, below is information to help you find a matching bushing from Energy Suspension's selection of universal flange type bushings.

Energy Suspension Universal Flange Bushings
Energy Suspension Universal Flange Bushings

How-to obtain the measurements

To obtain the first measurement you'll need to measure the length of the tube where the bushing will actually go inside. So this won't give you the total length of the bushing we need, just the length of the part of the bushing that will be inside the tube. Next, you will need the outer diameter of the bushing. Now, most of you do not have the luxury of measuring the outer diameter of the bushing you will need. But don't worry, you can simply measure the inner diameter of the tube you are working with and that should give you the diameter of the bushing you need.

Now the Length, or Sleeve length, will be the total length of the bushing you need including the flange. To measure the total length of the inner sleeve that your OE bushing has. If you don't have the OE sleeve that's okay. Just make sure you have the proper Bolt size for the sleeve to match your OE bolt size. If you don't have the bolts either, you'll be making a trip to the hardware store to get a bolt that matches the sleeve that comes with your universal bushings. If you have each measurement matched, but the bushing is too long, you can cut them down to match your needs. Once you have these measurements you can verify that this part will work for your application. If you find that this bushing will not match your measurements, you can go to our Universal Bushing Page to find a bushing that matches your measurements.

Energy Suspension Universal Flange Bushings
Energy Suspension 9.9488

Product Reviews for 9.9488 | Universal Flange Bushing | 1.760 in. OD 5/8 in. ID

5 Star (7)
88%
4 Star (1)
12%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.9488

5 out of 5 based on 8 user reviews. Write a Review

P
verified_user

starstarstarstarstar" good "

I used these as the Tbird bushings were 700.00 us. Just by changing center bushing sleeve. I think they did have but 4 weeks away. All worked well

verified_user Verified Buyer - - . Energy Suspension 9.9488 - 5 out of 5
D
verified_user

starstarstarstarstar" Nice product "

It is built to tight tolerances,very nice material. Very solid should last a long time. Thanks.

verified_user Verified Buyer - - . Energy Suspension 9.9488 - 5 out of 5
D
verified_user

starstarstarstarstar" Review 2 Years Later "

These are very good bushings I used them for motor mounts they held up extremely well and are not to hard I will definitely be buying these same style bushings for future projects

verified_user Verified Buyer - - . Energy Suspension 9.9488 - 5 out of 5
N
verified_user

starstarstarstarstar" Perfect part!!!! "

Great service! Parts worked just as planned no problems. Great quality.

verified_user Verified Buyer - - . Energy Suspension 9.9488 - 5 out of 5