unarchive In The Box of dhw003 keyboard_arrow_down
- Radiator Core Support
- Mount Bolt Qty 2
- Shim Qty 2
- Torque Lock Nut Qty 2
- Front Cab to Frame Mount
- Mounting Bolt Qty 2
- Flat Washer Qty 2
- Mid-Front Cab to Frame Mount
- Mounting Bolt Qty 2
- Flat Washer Qty 2
- Mid-Rear Cab to Frame Mount
- Mounting Bolt Qty 2
- Flat Washer Qty 2
- Rear Cab to Frame Mount
- Mounting Bolt Qty 2
add_shopping_cart Suggested Parts 2keyboard_arrow_down
KF04009BK is a polyurethane bushing replacement for the Body Mount bushings and Radiator Core Support bushings
These decals are guaranteed to fit multiple makes and models of vehicles or beverage containers and increase aesthetic appeal
Replace that dangerous corroded OE hardware with the dependability and peace of mind of the DHW003.
DST's DHW003
Your Body Mount's Worst Nightmare
Ready for a nightmare scenario? You've got that set of body mounts you needed, taken apart your ride, started to remove the old OE mounts only to realize there's no way that you can reuse the OE hardware. Now you're stuck without any way of installing your body mounts. What do you do now? Going out and searching for all new hardware can be extremely difficult. So let me show you how DST will keep you from being stranded.
Complete Your Install!
This is DHW003, a hardware kit designed to work with Daystars Body to Frame Mount kit KF04009BK for the 1991 - 1994 Ford Explorer 4-Wheel and 2-Wheel drive. For those of you with a 1995 - 2001 Ford Explorer check out DHW004 to get the hardware you need. Included in this kit are eight bolts and six washers for the body-to-frame mounts and two bolts, shims, and lock nuts for the radiator support. Now you may be asking, why are there only six washers when there are eight bolts? Well, the Front set and both Mid sets of mounts use washers on install, but the Rear set does not. Replace that dangerous corroded OE hardware with the dependability and peace of mind of the DHW003.