moog-513105 | Rear Wheel Bearing and Hub Assembly | 1990-2001 Integra

  • moog-513105 Rear Wheel Bearing and Hub Assembly - 4 Wheel ABS - Rear Disk Brakes
  • moog-513105 Rear Wheel Bearing and Hub Assembly - 4 Wheel ABS - Rear Disk Brakes

Rear Wheel Bearing and Hub Assembly - 4 Wheel ABS - Rear Disk Brakes

Manufacturer: MOOG
Part Number: moog-513105
Price: $154.32

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentRear Wheel Bearing and Hub Assembly - 4 Wheel ABS - Rear Disk Brakes moog-513105 fits these vehicles:
Details

moog-513105 | Rear Wheel Bearing and Hub Assembly | 1990-2001 Integra

Premium Moog Wheel Bearing and Hub Assembly
A complete wheel bearing and hub assembly that provides a simple, fast, cost efficient replacement of your old worn wheel bearings.

Acura Integra 1990-1996
For models with 4 wheel ABS.
  • For models with non ABS use 513033.
  • Acura Integra 1997
    For GS, GS-R and LS models with 4 wheel ABS.
  • For RS models with non ABS use 513034.
  • For Type R models with 4 wheel ABS 512255.
  • Acura Integra 1998
    For GS, GS-R and LS models with 4 wheel ABS.
  • For Type R models with 4 wheel ABS 512255.
  • Acura Integra 1999
    For GS, GS-R and LS models with 4 wheel ABS.

    Acura Integra 2000
    For GS, GS-R and LS models with 4 wheel ABS.
  • For Type R models use 512255.
  • Honda Civic 1992-1995
    For models with 4 wheel ABS and rear disc brakes.
  • For models with non ABS and rear disc brakes use 513034.
  • For models with rear drum brakes use 513035.
  • Honda Civic del Sol 1995-1997
    For models with 4 wheel ABS and rear disc brakes.
  • For models with non ABS and rear disc brakes use 513034.
  • For models with rear drum brakes use 513035.
  • Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

    Moog Wheel Bearing and Hub Assemblies

    Don't Live With All of Those Noises

    Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    OE Design Flaws

    The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

    • Loose wheels leaning into the vehicle
    • Premature tire wear and poor handling
    • Snapping or clicking noise on turns
    • Humming or rattling when driving straight
    • Anti-lock Braking System (ABS) light is on

    If you are experiencing any of these issues, get your vehicle checked out immediately.

    Roll Form Design

    All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    ABS Molded Shield and Socket Connections

    Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

    Moog Abrasion-Resistant ABS Cord

    Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    Quad Lip Seal Design

    Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

    Precision Match Components

    When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    Coated Wheel Stud Bolts

    The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

    Parts Engineered to the Highest of Standards

    Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

    Moog wheel bearing and hub assembly

    question_answer Customer Questions and Answers


    Question:
    Can I use the moog-513105 on a 96 Acura Integra without the ABS?
    Answer:
    Unfortunately No, you can not use the moog-513105 on a 96 Acrua with out the 4 wheel ABS. If you have the non ABS Acura you will need part number moog-512034.