moog-515086 | Front Wheel Hub Assembly | 01-06 Chevy Silverado 2500

  • moog-515086 Front Wheel Bearing and Hub Assembly
  • moog-515086 Front Wheel Bearing and Hub Assembly
  • moog-515086 Front Wheel Bearing and Hub Assembly
  • moog-515086 Front Wheel Bearing and Hub Assembly

Front Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-515086
Price: $300.12

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Wheel Bearing and Hub Assembly moog-515086 fits these vehicles:
Details

moog-515086 | Front Wheel Hub Assembly | 01-06 Chevy Silverado 2500

2002-2003 Chevrolet Avalanche 2500
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2003 and 2005-2006 Chevrolet Silverado 1500 HD
  • Fits RWD vehicles ONLY
  • For 4WD vehicles use 515058
2007 Chevrolet Silverado 1500 HD Classic
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2004 Chevrolet Silverado 2500
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2006 Chevrolet Silverado 2500 HD
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2007 Chevrolet Silverado 2500 HD Classic
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2006 Chevrolet Suburban 2500
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2003 and 2005-2006 GMC Sierra 1500 HD
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2007 GMC Sierra 1500 HD Classic
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2004 GMC Sierra 2500
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2006 GMC Sierra 2500 HD
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2007 GMC Sierra 2500 HD Classic
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058
2001-2006 GMC Yukon XL 2500
  • Fits RWD vehicles ONLY
  • For 4WD vehicles with 8 stud hub use 515058

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-515086
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletAvalanche 25002003-2002FrontRWD Quantity 2
ChevroletSilverado 1500 HD2006-2001FrontRWD Quantity 2
ChevroletSilverado 1500 HD Classic2007FrontRWD Quantity 2
ChevroletSilverado 25002004-2001FrontRWD Quantity 2
ChevroletSilverado 2500 HD2006-2001FrontRWD Quantity 2
ChevroletSilverado 2500 HD Classic2007FrontRWD Quantity 2
ChevroletSuburban 25002006-2001FrontRWD Quantity 2
GMCSierra 1500 HD2006-2001FrontRWD Quantity 2
GMCSierra 1500 HD Classic2007FrontRWD Quantity 2
GMCSierra 25002004-2001FrontRWD Quantity 2
GMCSierra 2500 HD2006-2001FrontRWD Quantity 2
GMCSierra 2500 HD Classic2007FrontRWD Quantity 2
GMCYukon XL 25002006-2001FrontRWD Quantity 2

question_answer Customer Questions and Answers


Question:
Ordered front hub assembly. This hub has axle splines. My truck doesn't have front axels. The outside cap is solid no dust cap 515086.
Answer:
The moog-515086 hub assembly is used on some 4x4 pickups. The moog-515086 when used on the 2wd pickup the opening does not effect the durability or performance of the hub assembly.

Question:
The part number looks correct but the hub looks like it’s for a 4WD, has a center hole with splines like for an axel to go into. I have read a lot of things about not putting a 4WD hub on a RWD truck because of premature failure. There are also no dust caps on the hub. Please confirm that this is the correct part for this vehicle.
Answer:
moog-515086 is correct for your Silverado RWD. The center of the hub assembly does not need to have a cover over the center hole. It is sealed and will not effect the durability of the hub assembly.

Question:
Is this for 1 or 2 in the pricing?
Answer:
All Moog hub assemblies are sold individually. You would need to purchase 2 doing the left and right sides.

Question:
I recently purchased a front wheel hub assembly for my truck. I'm kinda old school but does your 515086 hub assembly have a slined center hole?
Answer:
Yes 515086 center hole is splined for the 4x4 CV shaft.

Question:
Will part number 515086 fit my 2006 Chevrolet 2500 hd rwd?
Answer:
Yes, part number 515086 will fit the 2006 Chevrolet 2500 hd rwd.

Question:
The hub have lacked the inside dust caps for the 2wd application. Do they need to be purchased separately? Are they needed?
Answer:
it does not have to have the dust caps. They are sealed on the inside so you do not need to worry about water or dirt getting on the inside and causing damage.

Question:
Will part number 515086 fit my 2005 Chevy Silverado 2500 HD 2WD?
Answer:
Yes, part number 515086 will fit the 2005 Chevy Silverado 2500 HD 2WD.

Question:
Is the moog-515086 the correct front hub for my 2 wheel drive 01 GMC 2500 hd?
Answer:
Yes the moog-515086 is the correct front hub assembly for your 2 wheel drive 01 GMC Sierra 2500 HD.