lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Tie Rods
Connecting the Driver to the Vehicle
Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.
Designed for Strength, Durability, and Longevity
Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.
Product Reviews for moog-ds800980a | Complete Steering Assembly | Dodge Ram 1500 | DS800980A
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-ds800980a
starstarstarstarstar" Review 1 Year Later "
These are some of the best parts I have purchased for this rig. Ive had no with any of them.
verified_user Verified Buyer - William Poff - . MOOG moog-ds800980a - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Will the moog-ds800980a fit on my 04 Dodge 2500? How do I know if I have the 1st or 2nd steering design?
- Answer:
- The moog-ds800980a is fitted for the 04 Dodge Ram 2500 4x4, but it is the 2nd design steering linkage. You can tell if you have the first design if your steering damper is held on by a tapered hole in the tie rod, while the second design has the ste eering damper held on by a bracket. ...see more
- Question:
- For part# moog-ds800980a, how can I get a replacement boot for where the linkage connects to the pitman arm?
- Answer:
- Moog does not sell just the dust boot. I have universal polyurethane dust boots that are sold by dimensions. Here is a link to them: https://www.suspension.com/universal-dust-boots.asp. Put this link in a Google or Yahoo search. It should come up.
- Question:
- Is there a way to change the steering type for version 1 to the newer version 2 by purchasing this kit DS800980A?
- Answer:
- Yes Moog-ds800980a will convert your steering from the 1st design to the 2nd design.
- Question:
- If I have 1st design steering and order DS800980A will this convert it to 2nd design or will it not work at all?
- Answer:
- Yes moog-ds800980a kit will convert your steering from the 1st design to the 2nd design. It has the correct drag link, tie rods, adjusting sleeve, steering dampner and pitman arm.
- Question:
- Is the pitman arm supplied unique to this linkage kit or can this linkage kit be used with the original pitman arm?
- Answer:
- moog-ds800980a includes the correct pitman to complete the change from 1st to 2nd design steering.
- Question:
- Does this fit the 1st gen steering also? I have a 1st gen steering, and want to replace it with this new style steering.
- Answer:
- Yes moog-ds800980a will convert the steering from design 1 to the upgraded design 2. It includes every part needed for the conversion.
- Question:
- Is this kit considered an upgrade for the 05 dodgeram 2500?
- Answer:
- If your Ram has the 1st design moog-ds800980a will convert the steering to the 2nd design.
- Question:
- Does this kit convert from a 1st design to the 2nd design?
- Answer:
- moog-ds800980a does include all the parts to convert from the 1st design to the 2nd design.
- Question:
- I have the 2005 dodge ram 2500 with the 1st design steering linkage will your ds800980a fit my truck is this considered an upgrade???
- Answer:
- moog-ds800980a will fit your Ram pickup. Yes, it is considered an upgraded part.
- Question:
- Are all the suspension and front end steering parts the same for both the gasoline and diesel models?
- Answer:
- For the Ram 2500/3500 gas and diesel are the same steering parts.
- Question:
- Is the the 1st or 2nd design?
- Answer:
- moog-ds800980a is the 2nd design steering linkage.
- Question:
- How do I know if I have a first design steering linkage, or a second design steering linkage?
- Answer:
- Look at the steering dampner. If it is attached to the tie rod with a tapered stud it is the first design. If there is a bracket attached to the tie rod with u-bolts it is the second design.
- Question:
- I have the 1st design, according to the steering damper having the taper bolt, not the bracket. Wondered if I purchased this kit being 2nd design if it would fit with no other part changes.
- Answer:
- moog-ds800980a steering assembly will convert the steering to the 2nd design. No other parts are needed to complete the conversion.
- Question:
- What is the difference between the moog-packagedeal105 and the moog-ds800980a?
- Answer:
- Part number ds800980a is the steering linkage kit, so it will come with the adjusting sleeves, drag link, tie rod ends, pitman arm, and damper. The packagedeal105 will come with the upper and lower ball joints, inner and outer tie rod ends, and the t tie rod adjusting sleeves. ...see more