add_shopping_cart Suggested Parts 2keyboard_arrow_down
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k500245 | Front Lower Ball Joint | Chevrolet Suburban 2015-2016
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k500245
starstarstarstarstar" Worked as advertised "
Part worked great to the factory ball joint. The snap ring was much easier to install than trying to crimp the standard ball joint. Part went using a rented ball joint press from the local auto parts store.
verified_user Verified Buyer - Brandon benton - . MOOG moog-k500245 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Moog K500245 - Front lower ball joint- 2014 Chevy Silverado 1500 4wd - The description of the lower ball joint is a little confusing , I want to make sure it fits the above mentioned truck.
- Answer:
- Part number Moog-K500245 will fit the 2014 Silverado 1500 4x4, but only if your pick up has the aluminum arms. These Silverados can have an aluminum lower control arm or a steel lower control arm, which would call for different ball joints.
- Question:
- Will Part Number: moog-k500245 absolutely fit my vehicle 2014 GMC Sierra 1500 4wd sub model: All terrain?
- Answer:
- yes, Moog-k500245 will fit your 2014 GMC Sierra 1500 4wd sub model: All terrain as long as you have an aluminum lower control arm with an aluminum spindle.
- Question:
- Your part number moog-k500245 do the snap rings hold it together as opposed to the factory crimp style?
- Answer:
- moog-k500245 is pressed into the lower control arm. Moog adds the snap ring as a safety feature. If the ball joint was to work its way free the the snap ring would help keep the ball joint in the arm.
- Question:
- Does the Moog K500245 part number have a dust boot or dust cover?
- Answer:
- moog-k500245 does not have an external dust. Moog changed the design of the ball joint and it has an integral dust boot made into the ball joint.
- Question:
- Installing Lower Front Ball Joints, Do You Have To Crimp Joint After Being Pressed In.
- Answer:
- No you would not have to crimp the control arm or ball joint. The ball joint has a snap ring that would keep the ball joint from falling out if would walk it's way out.
- Question:
- Is the tube of Locktite applied between the ball joint and the lower control arm during the pressing in phase of the installation?
- Answer:
- Yes the Locktite would be applied to the ball joint that is pressed in do the spindle.
- Question:
- Will part number k500245 work for both the left and right sides?
- Answer:
- Yes, part number k500245 will work for both the left and right sides.