add_shopping_cart Suggested Parts 2keyboard_arrow_down
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k6540 | Chevrolet and GMC Front Upper Ball Joint | Moog K6540
- 5 Star (0)
-
-
- 0%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (1)
-
-
- 100%
-
MOOG moog-k6540
starstar_borderstar_borderstar_borderstar_border" Review 2 Years Later "
Didnt last but a couple months a leveled truck. Editor Note: The upper ball joint k6540 has to be installed correctly. If not installed correctly the tapered stud will snap off. This is happened with this ball joint. Moog has a tag on the stud that says this and also special instructions in the box.
verified_user Verified Buyer - Chase Hampton - . MOOG moog-k6540 - 1 out of 5question_answer Customer Questions and Answers
- Question:
- Am I able to buy a replacement dust boot for part number k6540?
- Answer:
- Yes, you would have to do a polyurethane replacement though.
- Question:
- Are the K6540 and K6541 the same part?
- Answer:
- These two ball joints have different fitments, the K6540 will only fit the Sierra 1500 from 99-06, while the K6541 is for the 07-15
- Question:
- Just want to let y’all know you have very poor quality parts I have my ball joints in my truck for about a week and my upper ball joint snapped clean in half cause me to almost total my truck and I’m not happy about it at all and will not be buying any of talks parts anymore and I will not be recommending talks parts either
- Answer:
- The upper ball joint failed because it was not installed properly. The ball joint has a tag on the stud that warns the installer the ball joint must be installed a particular way. The body of the ball joint has hole drilled in the flange and a paint daub. That must be pointed at the tire. If not it will snap off the tapered stud and could cause a lot of damage. ...see more
- Question:
- Can I just purchase the boot for the moog-k6540 dust boot?
- Answer:
- Unfortunately Moog does not sell their dust boots alone from their parts at this time.
- Question:
- Do you sell the rubber replacement dust boot for part number k6540?
- Answer:
- No, Moog does not sell their dust boots individually. However, you can get a polyurethane replacement boot.
- Question:
- Is my ball joint, part number k6540 warrantied through you even though I bought it through Rock Auto?
- Answer:
- No, your warranty goes back through who you originally bought the part from.
- Question:
- I have a Super lift kit on my pickup that uses the moog-k6540 ball joints. How would I do a warranty process for these ball joints to get replacements for the failed ones in my SuperLift control arm?
- Answer:
- We are an authorized dealer of Moog and can only warranty Moog parts purchased through our company. You will need to go through your original dealer of the parts for a warranty process. Moog parts are to be used in the stock OE parts for what they a are fitted for, we will not warranty parts that are used in lifted or aftermarket applications. ...see more
- Question:
- Do you have just the dust boot for k6540?
- Answer:
- No, Moog does not sell just the dust boot for part number moog-k6540.
- Question:
- Do you sell the boots separately for your upper ball joints?
- Answer:
- Unfortunately Moog does not sell their dust boots alone from their parts at this time. However we do offer polyurethane dust boots that you can purchase, they are based on dimensions: https://www.suspension.com/universal-dust-boots.asp
- Question:
- Does the moog-K6540 have a integrated ball joint dust boot?
- Answer:
- At this time (1/24/19) Moog has not redesigned the moog-K6540 to have a integrated dust boot.
- Question:
- Do you have installation instructions for the part K6540?
- Answer:
- Moog does not have install instructions. Look on YouTube for how to video.
- Question:
- Is the dust boot on part number k6540 covered under warranty?
- Answer:
- No, the dust boots are not covered under warranty.
- Question:
- Need upper ball joint dust boots.
- Answer:
- Moog does not offer the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google/Yahoo search: https://www.suspension.com/universal-dust-boots.asp. This will help you find a dust boot.
- Question:
- I need to just get replacement dust boots what part number is that?
- Answer:
- Moog does not offer the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google/Yahoo search: https://www.suspension.com/universal-dust-boots.asp. This will help you find a dust boot.
- Question:
- The you sell the replacement dust boot made by energy suspension that fit the MOOG - K6540.
- Answer:
- Moog does not offer the dust boots. I have Energy universal polyurethane dust boots sold by dimensions. Put this link in a Google/Yahoo search: https://www.suspension.com/universal-dust-boots.asp. This will help you find a dust boot.