moog-k80771 | Front Lower Ball Joint | Ford Explorer | MOOG-K80771

  • moog-k80771 Front Lower Ball Joint
  • moog-k80771 Front Lower Ball Joint

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k80771
Price: $40.24

check_box In Stock check_box Ships Immediately


Suggested part for moog-k80771: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k80771: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Lower Ball Joint moog-k80771 fits these vehicles:
Details

moog-k80771 | Front Lower Ball Joint | Ford Explorer | MOOG-K80771

For Ford Ranger Torsion Bar Suspension only

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint

Warranty

Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

MOOG moog-k80771

Product Reviews for moog-k80771 | Front Lower Ball Joint | Ford Explorer | MOOG-K80771

5 Star (4)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k80771

5 out of 5 based on 4 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 1 Year Later "

No complaints... They were relatively easy to install and I have had no problems to report.

verified_user Verified Buyer - - . MOOG moog-k80771 - 5 out of 5
D
verified_user

starstarstarstarstar" Review 2 Years Later "

Have had no problems, fit great, outstanding quality.

verified_user Verified Buyer - - . MOOG moog-k80771 - 5 out of 5
J
verified_user

starstarstarstarstar" Review 1 Year Later "

No complaints... They were relatively easy to install and I have had no problems to report.

verified_user Verified Buyer - - . MOOG moog-k80771 - 5 out of 5
D
verified_user

starstarstarstarstar" Like... "

I installed both lowers as well as the upper control arms on my 4x4 ranger. They weighed twice as much as the cheap parts that were installed before. I wish I had taken the time to buy Moog the first time and saved my hard earned cash.. If you can install them yourself do so and be done with it!

verified_user Verified Buyer - - . MOOG moog-k80771 - 5 out of 5
Fitment for moog-k80771
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordExplorer2010-2006Front Lower Quantity 2
FordExplorer Sport Trac2010-2007Front Lower Quantity 2
FordRanger2011-2002Front Lower Quantity 2
MazdaB30002007-2002Front Lower Quantity 2
MazdaB40002009-2002Front Lower Quantity 2
MercuryMountaineer2010-2006Front Lower Quantity 2

question_answer Customer Questions and Answers


Question:
I ordered some replacement lower control arm ball joint K80771 going into TRQ lower control arms. The control arms are OEM spec and upon installing the ball joint they were loose in their housing.
Answer:
The TRQ control arms are OEM spec replacement arms. TRQ used a different size ball joint than what the OEM arm used. Moog uses OEM specs on their ball joints.

Question:
Does this ball joint come with a actual dust boot/ grease boot?
Answer:
Moog has redesigned moog-k80771 for an integral dust boot. Moog has done away with the external dust boot.

Question:
Will part number k80771 fit the OE control arms?
Answer:
Yes, part number k80771 will fit the OE control arms only.

Question:
Is the ball joint supposed to have a dust cover boot in the box?
Answer:
moog-k80771 is a redesigned ball joint. It has an integral dust boot. It no longer has the external dust boot.

Question:
Does some of these not come with a boot.
Answer:
Moog has redesigned moog-k80771. It does not have the external dust boot. It now has an integral dust boot made into the ball joint.

Question:
Can you advise if a dust boot should be included with this ball joint?
Answer:
Moog has changed the design of moog-k80771 from the external dust boot to the integral dust boot made into the body or base of the ball joint.