moog-k8412t | Front Upper Ball Joint | Ford Bronco II | Moog-K8412T

  • moog-k8412t 360image 1
  • moog-k8412t Front Upper Ball Joint
  • moog-k8412t Front Upper Ball Joint
  • moog-k8412t Front Upper Ball Joint
  • moog-k8412t Front Upper Ball Joint
  • moog-k8412t 360image large 1

Front Upper Ball Joint

Manufacturer: MOOG
Part Number: moog-k8412t
Price: $45.64

check_box In Stock check_box Ships Immediately


Suggested part for moog-k8412t: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k8412t: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Upper Ball Joint moog-k8412t fits these vehicles:
Details

moog-k8412t | Front Upper Ball Joint | Ford Bronco II | Moog-K8412T

Fits Models With Dana 28 Axle
Following Models Fit 4WD Only:
  • 1986-1990 Ford Bronco II
  • 1991-1994 Ford Explorer
  • 1983-1997 Ford Ranger
Following Models Fit RWD Only:
  • 1981 Ford F-100
  • 1981-1986 Ford F-150

Moving the grease fitting not only makes it possible to service the ball joint after installation, it also will keep the grease fitting from interfering with the drive axle as well.

Moog Ball Joint K8412T

Trouble with Your Ford's Ball Joint Replacement?

Did you at some point during the life of your Ford light truck or SUV have to replace the upper ball joint? If you did chances are you can't get to the grease fitting now so that you can service it. Even worse you might have noticed that the ball joint and the drive axle are damaged. You don't have to be a DST parts expert to know how infuriating this can be. Moog has the solution to your problem in their upper ball joint K8412T.

k8412t
k8412t

The Problem With Most Replacement Ball Joints

Most OE ball joint replacements don't account for the position of the drive axle, leaving you unable reach the grease fitting. This is also causing damage to not only the grease fitting on the ball joint but also the drive axle. If left unchecked this could damage other parts of your vehicle, costing you even more money in repairs.

Moog Knows How to Solve Problems

Moog has solved these problems by simply moving the grease fitting to the corner of the ball joint on K8412T. Moving the grease fitting not only makes it possible to service the ball joint after installation, but it also keeps the grease fitting from interfering with the drive axle. K8412T also comes with Moog's hardened powdered-metal bearings that are far more durable than the OE plastic bearings, which wear excessively in adverse conditions. Moog's K8412T comes equipped with a polychloroprene sealed boot with a grease relief valve that keeps out the harmful road contaminants that cause premature wear.

k8412t
k8412t

The Benefit of Moog

With K8412T you not only get an upper ball joint that is now serviceable, but you also get the added durability that Moog provides. The added benefit of Moog doesn't stop there, however. K8412T also comes with a lifetime warranty that reflects Moog's confidence in their parts. And don't worry about the hassles of a warranty, our DST customer service team can handle all of that for you should you need.

MOOG moog-k8412t

Product Reviews for moog-k8412t | Front Upper Ball Joint | Ford Bronco II | Moog-K8412T

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k8412t

5 out of 5 based on 1 user reviews. Write a Review

T
verified_user

starstarstarstarstar 5

Great delivery of the parts and parts was easy to install.

verified_user Verified Buyer - - . MOOG moog-k8412t - 5 out of 5