lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Alignment Parts
Caster or Camber issues? Moog has got you covered with their line of alignment parts. Moog's engineers have designed this part to give you adjustability and flexibility with the alignment angles in your suspension. Whether caster, camber, or both, Moog's alignment parts will set your suspension up better than when you first drove the vehicle off the lot.
question_answer Customer Questions and Answers
- Question:
- Is part number k90474 for the top or bottom hole on the strut?
- Answer:
- Part number k90474 is for the top hole on the strut.
- Question:
- How many bolts in this kit?
- Answer:
- part number k90474 will come with one bolt, you will need two to cover the left and right sides of your vehicle
- Question:
- does the MOOG-K90474 kit come with two camber bolts?
- Answer:
- That would come with a single bolt in that kit.
- Question:
- What is the difference between k5330 and k90474? Do they both fit the 2006 subaru baja?
- Answer:
- Yes, both part numbers k5330 and k90474 will fit the 2006 subaru baja. Part number k5330 is a double offset and provides plus or minus 1 1/4 degrees and will increase camber adjustment range to plus or minus 2.5 degrees. Part number k90474 is a singl le offset provides plus or minus 1 3/4 degrees. ...see more
- Question:
- What is the difference between part K90474 and K5330?
- Answer:
- It appears the kit you are looking for would be Moog K5330
- Question:
- What strength (grade) steel are these bolts made out of?
- Answer:
- Part number moog-k90474 has a graded strength of 12.9.
- Question:
- Can I use this kit for the front and rear on my 1998 Saturn SC2?
- Answer:
- No part number moog-k90474 is only for the front.
- Question:
- I see you have a camber kit for the front. Do you also have a caster alignment kit also?
- Answer:
- I am sorry, but Moog does not have a caster kit for your Kia at this time.
- Question:
- Does the Alignment bolt K90474 come two in a kit?
- Answer:
- No, the alignment bolt K90474 comes one in a kit.
- Question:
- I'm looking to buy a camber bolt kit for my front struts so I can get the alignment. My question is do I need to replace both bolts that hold the strut to the knuckle, or just one of the bolts per strut?
- Answer:
- You would purchase one for each side. Traditionally only the upper bolt would have the adjusting bolt.
- Question:
- Can I use the moog-k90474 on the rear of my 01 Subaru Outback?
- Answer:
- No, the moog-k90474 is only fitted for the front of your 01 Subaru Outback.