moog-rk622887 | Front Right Upper Control Arm | 1975-1986 Chevrolet C20

  • moog-rk622887 Front Upper Control Arm and Ball Joint Assembly - Passenger Side
  • moog-rk622887 Front Upper Control Arm and Ball Joint Assembly - Passenger Side

Front Upper Control Arm and Ball Joint Assembly - Passenger Side

Manufacturer: MOOG
Part Number: moog-rk622887
Price: $73.71

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Upper Control Arm and Ball Joint Assembly - Passenger Side moog-rk622887 fits these vehicles:
Details

moog-rk622887 | Front Right Upper Control Arm | 1975-1986 Chevrolet C20

Fits Non-ABS

1984-1991 Chevrolet G30
  • Doesn't fit F42 Heavy Duty Suspension
1973-1974 Chevrolet P30 Van and 1975-1982 Chevrolet P30
  • Doesn't fit 11,000LB Rear Axle or 14,000LB GVW
1983-1984 Chevrolet P30
  • Doesn't fit 11,000LB Rear Axle
1985-1990 Chevrolet P30
  • Fits Standard Cargo Van
  • Doesn't fit I-Beam Front Axle
1991-1993 Chevrolet P30
  • Fits Standard Cargo Van
  • Fits Rear Drum Brakes
  • Doesn't fit I-Beam Front Axle
1994-1996 Chevrolet P30
  • Fits Rear Drum Brakes
  • Doesn't fit I-Beam Front Axle
1973-1974 GMC C35/C3500 Pickup and 1975-1978 GMC C35
  • Doesn't fit 11,000LB GVW
1979-1986 GMC C3500
  • Doesn't fit 10,500LB GVW
1984-1991 GMC G3500
  • Doesn't fit F42 Heavy Duty Suspension
1973-1974 GMC P35/P3500
  • Fits Standard Cargo Van
  • Doesn't fit 11,000LB Rear Axle
1975-1978 GMC P35 and 1979-1982 GMC P3500
  • Fits Stripped Chassis without 14,000LB GVW
  • Fits Standard Cargo Van without 11,000LB Rear Axle
1983-1984 GMC P3500
  • Fits Standard Cargo Van
  • Doesn't fit 11,000LB Rear Axle
1985-1994 GMC P3500
  • Fits Standard Cargo Van
  • Doesn't fit I-Beam Front Axle
1995 GMC P3500
  • Doesn't fit I-Beam Front Axle

For the driver side use rk622888

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-rk622887