unarchive In The Box of 11.18105 keyboard_arrow_down
- Front Control Arm Bushing Set - 11.3111
- 4 of 03P03596 - Front Upper Control Arm Bushing - Outer Position
- 4 of 03P03597 - Front Upper Control Arm Bushing - Inner Position
- 4 of 15.10.324.39 - Metal Sleeve (.875" x .500 x 2.140)
- 2 of 03P03598 - Front Lower Control Arm Bushing - Front Position - Front
- 2 of 03P03599 - Front Lower Control Arm Bushing - Front Position - Rear
- 2 of 15P1069739 - Metal Sleeve (1.125" x .563 x 2.360)
- 4 of 03P03600 - Front Lower Control Arm Bushing - Rear Position
- 2 of 15P1071439 - Metal Sleeve (1.125" x .563 x 2.250)
- 1 of 17P17677 - Installation Instructions
- Rear Control Arm Bushing Set - 11.3112
- 4 of 07P07157 - Rear Toe Control Link
- 2 of 15.10.17.39 - Metal Sleeve (.875" x .625 x 1.960)
- 4 of 15.03.99.39 - Cap Washer (1.295" x .500 x .225)
- 4 of 07P07158 - Rear Lateral Link # 2
- 2 of 15.10.17.39 - Metal Sleeve (.875" x .625 x 1.960)
- 4 of 15.03.99.39 - Cap Washer (1.295" x .500 x .225)
- 4 of 07P07159 - Rear Lateral Link # 3
- 2 of 15.10.324.39 - Metal Sleeve (.875" x .500 x 2.140)
- 4 of 07P07160 - Rear Lateral Link # 1
- 2 of 15.10.324.39 - Metal Sleeve (.875" x .500 x 2.140)
- 4 of 07P07161 - Rear Lateral Link
- 2 of 15.10.497.39 - Metal Sleeve (.875" x .500 x 1.880)
- 2 of 07P07162 - Rear Trailing Link At Knuckle
- 2 of 15.10.497.39 - Metal Sleeve (.875" x .500 x 1.880)
- 2 of 07P07163 - Lateral Link # 3 at Knuckle
- 2 of 15.10.497.39 - Metal Sleeve (.875" x .500 x 1.880)
- 2 of 07P07164 - Lateral Link # 2 at Knuckle
- 2 of 15.10.335.39 - Metal Sleeve (.875" x .500 x 1.943)
- 1 of 17P17678 - Installation Instructions
- Front Sway Bar Bushing Set - 11.5116
- 2 of 05P06042 - Sway Bar Bushing - 22mm (0.866 inch)
- 2 of 15P0813442 - Shaft Collar -7/8" I.D.
- 1 of 17P17679 - Installation Instructions
- Rear Sway Bar Bushing Set - 11.5117
- 2 of 05P06004 - Sway Bar Bushing - 11mm (0.433 inch)
- 2 of 15P0813542 - Shaft Collar -7/16" I.D.
- 1 of 17P17679 - Installation Instructions
- Rear Differential Bushing Set - 11.1102
- 2 of 01P01352 - Differential Bushing
- 2 of 15.10.560.39 - Metal Sleeve (1.000" x .438 x 1.950)
- 1 of 17P17676 - Installation Instructions
add_shopping_cart Suggested Parts 4keyboard_arrow_down
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
8 ounce tub of High Performance Grease by Energy
3 - 5ML High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Kit for Mazda Miata MX-5 2016
If you are looking to tighten the suspension on your 2016 Mazda Miata MX5 then you want the power of polyurethane provided in this HyperFlex Kit. By upgrading those OE rubber bushings to HyperFlex polyurethane bushings you will gain quicker response and greater control while handling your Miata MX5.
Rubber bushings have their place, but there is no question that polyurethane bushings give your Miata MX5 a drastic improvement in handling over the OE rubber bushings that it came with. If you never plan on taking any corners at "fun" speeds then those rubber bushings will keep you comfortable while you slowly crawl down the road. But if you want a suspension that will give you total control while handling your Miata MX5 then the longer lasting, punishment absorbing, turn burning polyurethane bushings are the answer.
Front Suspension Bushings
This HyperFlex kit includes the complete polyurethane bushing sets for the front control arms and the front sway bar. When you upgrade the front control arm bushings on your Miata MX5 you can rest assured knowing that even under the most extreme conditions, proper alignment will be maintained. The polyurethane front sway bar bushings offer a great amount of handling improvement and will allow you to get the most out of your sway bar.
Parts Included:
Rear Suspension Bushings
The rear suspension of your Miata MX5 will be enhanced with a polyurethane rear control arm bushing set, rear sway bar bushing set, and the rear differential bushing set. One thing you do not want to happen while you're accelerating into a turn is wheel hop. So, to keep you out of the sidewall, these rear control arm bushings will help your Miata MX5 maintain road contact with your rear tires. New rear sway bar bushings will help you maintain alignment during turns and with polyurethane bushings stiffening up your rear differential you will notice your MX5's hard launches getting a lot quicker. And so will everyone else, if they don't blink.
Parts Included:
