3.7110 | Rear Track Arm Bar Bushings - Chevrolet Impala

  • 3.7110 360image 1
  • 3.7110 Rear Track Arm (panhard) Bushings
  • 3.7110 Rear Track Arm (panhard) Bushings
  • 3.7110 Rear Track Arm (panhard) Bushings
  • 3.7110 Rear Track Arm (panhard) Bushings
  • 3.7110 Rear Track Arm (panhard) Bushings
  • 3.7110 360image large 1

Rear Track Arm (panhard) Bushings

Manufacturer: Energy Suspension
Part Number: 3.7110

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $17.44

check_box In Stock check_box Ships Immediately


Suggested part for 3.7110: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

Suggested part for 3.7110: 9.11104
9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 3.7110 to 71207
Prothane 71207
Polyurethane.
Price: $12.57
Warranty: Lifetime Warranty

FitmentRear Track Arm (panhard) Bushings 3.7110 fits these vehicles:
Details
Polyurethane Rear Track Bar Bushings
Energy's Track Rod Bushings help prevent the suspension system from shifting unwontedly left to right during both normal or rugged or performance driving

3.7110 | Rear Track Arm Bar Bushings - Chevrolet Impala

Track bars with both ends same I.D. (1 1/8 inch) use # 3.7112

Polyurethane Rear Track Bar Bushings
  • Polyurethane components with high strength engineered in by design.
  • Made of Energy's HYPERFLEX performance polyurethane to add both performance and durability.
  • Help prevent the front suspension system from shifting unwontedly

Energy Suspension Track Arm Bushings

Track arms, also known as panhard rods, are designed to enhance driver control and safety while cornering through several tasks: Keeping your suspension centered, reducing body roll, and increasing driver control. Now, even with the track arm installed your suspension can shift while you corner. The amount of shifting that occurs depends largely on the quality of bushings you have installed for your track arm.

OE track arm bushings are most commonly made of soft rubber. Rubber, while able to absorb a great deal of vibrations from the road, simply flexes too much to be a decent material for track arm bushings. Energy Suspension makes all of their track arm bushings out of Hyperflex polyurethane, a material that not only offers better performance than rubber, it'll also last much longer. Capable of withstanding great amounts of heat, pressure, and road contamination, these Hyperflex bushings are guaranteed to outlast and outperform the OE. Now, due to polyurethane's firmer nature, there is a good chance that your NVH may increase slightly once these bushings are installed. But, the increase in your control and safety while cornering is well worth it. Plus, Energy Suspension covers all of their track arm bushings with a two-year warranty handled in-house here at DST.

energy box
Energy Suspension 3.7110

Product Reviews for 3.7110 | Rear Track Arm Bar Bushings - Chevrolet Impala

5 Star (5)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 3.7110

5 out of 5 based on 5 user reviews. Write a Review

L
verified_user

starstarstarstarstar" great product !!! "

Works and fits like a dream!

verified_user Verified Buyer - - . Energy Suspension 3.7110 - 5 out of 5
T
verified_user

starstarstarstarstar" Review 1 Year Later "

The vehicle is still in restoration stages, However I have installed the parts you sold me and appear to be perfect. Thank You for checking and I hope to have further info in the near future.

verified_user Verified Buyer - - . Energy Suspension 3.7110 - 5 out of 5
R
verified_user

starstarstarstarstar" They didnt fit "

It was as simple as they did not fit my car, 1966 Impala. Editors Note: Chevy used 2 different panhard bars. The bar could have the same size or 1 small and 1 bigger bushing. Before ordering need to make sure which panhard bar you have.

verified_user Verified Buyer - - . Energy Suspension 3.7110 - 5 out of 5
A
verified_user

starstarstarstarstar" Excellent quality product "

Specially had been difficult to me to find this track arm bushings to my Chevy Impala but fortunately I found them at suspensionparts.com

verified_user Verified Buyer - - . Energy Suspension 3.7110 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
3.7110 compare
$17.44
Prothane
Prothane compare
$12.57
($4.87) cheaper

question_answer Customer Questions and Answers


Question:
What is this bushing made out of?
Answer:
Part number 3.7110 is made out of polyurethane.