• 4.3133 Axle Pivot Bushings
  • 4.3133 Axle Pivot Bushings
  • 4.3133 Axle Pivot Bushings
  • 4.3133 Axle Pivot Bushings
  • 4.3133 Axle Pivot Bushings
  • 4.3133 Axle Pivot Bushings

Axle Pivot Bushings

Part Number: 4.3133
Manufacturer: Energy Suspension
Rating 33


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $28.82

In Stock Ships Immediately

Polyurethane Axle Pivot Bushings
Keep your truck running straight!

Axle Pivot Bushings for F150 F250 F350 Bronco Explorer

Polyurethane Axle Pivot Bushings
Energy Suspension's Axle Pivot Bushings will restore alignment lost to worn bushings. The heavy I Beams in Ford trucks can quickly wear out rubber bushings. These new polyurethane bushings are tough enough for off road use yet compliant enough for everyday driving.
  • One Set Will Cover the Left and Right Side

  • 2 - 3228-3 - Axle Pivot Bushings
  • 2 - 3119 - Thrust Washers
  • 2 - 911108 Formula 5 Prelube
  • 1 - Installation Instructions - #17051

Alternate Part Numbers for 4.3133
  • ENE-4.3133G
  • ENE-4.3133R
  • ENS-4-3133G
  • ENS-4-3133R
  • 43133G
  • 43133R

Energy Suspension 4.3133

Product Reviews for Axle Pivot Bushings 4.3133

Energy Suspension 4.3133

5 out of 5 based on 33 user reviews. Write a Review

Been using these for years. Wont use anything else. Have never had to repeat the job with Energy Suspension.
5 out of 5 - excellent
West Tire - . Energy Suspension 4.3133
Excellent product and fitment.
5 out of 5 - great parts
RodgerLanoue - . Energy Suspension 4.3133
Installed easily, good product, no more flex in my axle.
5 out of 5 - Very strong product
Daniel Henderson - . Energy Suspension 4.3133
1995 Ford Bronco. Easy to install. I have used Energy Suspension products before with previous 4x4s and quality still as good today as it was back then.
5 out of 5 - Very impressed with product
Jeremy R - . Energy Suspension 4.3133
Great product improved my truck greatly. It would help if the part bags where identified better, I ordered for two different truck and had to do some research to figure out which was which. Check all the parts before starting. I had 2 two of the steel centers with the wrong inside diameter. Make sure you have the tools to do the job, removed of the old parts was the hard part, the new parts went in easy and fit good.
4 out of 5 - Good product. Need to watch quality control a little better
Jon D Pontsler - . Energy Suspension 4.3133
Installed easily, good product, no more flex in my axle.
5 out of 5 - Very strong product
Daniel Henderson - . Energy Suspension 4.3133
I noticed a great improvement after installing the bushings, installation and instructiions were no probllems, the only issue was removing the OEM Ford busings, a little grinnding and the ball joiint press popped them out. I would definately recommend Energy Suspensions bushing verses the OEM bushing.`
5 out of 5 - Energy Suspensions design of the Ford axle pivot busshings 4.3133 by far exceeds the Ford OEM design.
Michael Deatras - . Energy Suspension 4.3133
Just like all energy suspension parts they are still holding up with no signs of wear yet. Always been high quality for reasonable cost. Way better than the stock ones from the factory.
5 out of 5 - Review 2 Years Later
gregg kordenat - . Energy Suspension 4.3133
still working great , it is a very good product !
5 out of 5 - Review 1 Year Later
Charles W. Van Nest - . Energy Suspension 4.3133
Quality like this is what i have come to expect from a company like ENERGY. Parts arrived on time and in great shape. A complete pleasure doing business with SUSPENSION.COM
5 out of 5 - great
donald r stever - . Energy Suspension 4.3133
Bushings fit and worked as supposed to.
5 out of 5 - great part
jeff - . Energy Suspension 4.3133
Makes the truck drive a like a truck. Should have done this years ago.
5 out of 5 - Review 1 Year Later
Kevin Holmes - . Energy Suspension 4.3133
It is easy to replace if the axle is removed and broke in half. It could be done on the vehicle but more challenging.
5 out of 5 - good
Keith Crawford - . Energy Suspension 4.3133
Great product, and super fast shipping. <br />
5 out of 5 - Outstanding product!
charles van nest - . Energy Suspension 4.3133
The new parts were installed without any problems. They seem to fit just as well as the original parts if not better. I would recommend this product when you need to tighten up your suspension.
5 out of 5 - parts are very good quality
Jesse Conrad - . Energy Suspension 4.3133
Could have come with a better description on how to install the parts. Also would of been nice for a more definable application to what unit or style of front end they went on.
5 out of 5 - made my truck ride a lot better
Chuck Schain - . Energy Suspension 4.3133
Once i figured out which parts to use, went together well. Interested to see how they perform once the rest of the lift kit is installed
5 out of 5 - GOOD
Brian Lauritsen - . Energy Suspension 4.3133
Product was easy to install on my 96 f250 powerstroke. Initially I was spectical but with how easy it was to install these products are well worth the money . It tightened up the Ttb axle and made the truck drive straight and it is as smooth as an 150.
5 out of 5 - Very excellent product Top Notch!
Richard in Az - . Energy Suspension 4.3133
This part fit is excellent. With the proper tools and procedure r&r was done in my driveway. Noticeable improvement in driveability after installation with no noise. Next, rear springs.
5 out of 5 - Excellent
jack schmermund - . Energy Suspension 4.3133
not for an E-350 ford van but they worked anyway using the lube provided..It is not the first time i ordered E-350 parts online and got f-350 parts..A small error but i was not going to spend another 7 hours replacing them again..big difference from the rubber ones as the alignment came back to factory specs. Improved steering response also.
5 out of 5 - Very ridgid..
Stanley - . Energy Suspension 4.3133
I ordered these along with the leaf spring bushings. I should have done this a long time ago. These were installed on a 1995 F250 4X4. Even with the bad design of the TTB front axle, these bushings make all the difference in the world and in my opinion are an absolute requirement. Without these bushings you will have trouble holding an alignment if you can align it at all. My truck never drove so well.
5 out of 5
Dale A Schrock - . Energy Suspension 4.3133
Parts are great and installed easy vehicle drives lots better the directions for install could be better since there is apiece with new that is not on vehicle from oem
5 out of 5
Troy Smith - . Energy Suspension 4.3133
Correct part, superior to stock, fixed my alignment problem.
5 out of 5
Terrell A Gunter - . Energy Suspension 4.3133
I have read about Energy Suspension parts and once I had known mine was wearing, I just knew that it was what I wanted, and so far so good with how they claim it to be. I will certainly be replacing my other worn parts with Energy Suspension parts, thanks for making these types of products! And for the distribution of the parts, they came pretty quick, so I was happy about that too, thanks again!
5 out of 5
Steve Cook - . Energy Suspension 4.3133
Ordered these as part of an overall suspension overhaul. It took a lot of work to replace them because pressing the bushings out either requires a ball joint press (to do it on the auto) or the complete removal of the arm for a shop press. Neither are easy on an old auto (obviously). Once they came out, the new ones pushed in much easier. Somewhat strange that the innards of the bushing are in three pieces instead of one and the external ring doesn't grip on the busing sleeve like one would think it should. Now that they're in, the ride is much better. An 87 Bronco II now turns mostly flat instead of leaning way outside, and the bumps are quiet! Well worth it. And if you're getting them, buy a box of 100 nitrile gloves because the grease stuff that comes with them is VERY sticky and doesn't come off with any cleaner except time. Seems to be silicone based.
5 out of 5 - Wow, but lots of work.
Matthew Draper - . Energy Suspension 4.3133
Very good product. My F250 has 76000 miles on it and the factory rubber bushings were completely worn out. The energy suspension bushings will still be there when it has 3000000 miles on it.
5 out of 5 - Good product!
mark gattoni - . Energy Suspension 4.3133
The item is great, set the correct angle back into my front Axel on my 97 ranger. The sleeves were not needed as they seem to be built into the axle on my truck.
5 out of 5 - Very easy to install
Anthony Spevacek - . Energy Suspension 4.3133
I cant attest to longevity but the fit and finish were excellent. Good product as far as I can tell and price and shipping were reasonable.
5 out of 5 - Seems to be a quality product.
Mark Simpson - . Energy Suspension 4.3133
Installed these and greatly improved the drivability of my truck. A lot better feel of the road and a lot more control. Going to get the body kit next.
5 out of 5 - Great product
David Shones - . Energy Suspension 4.3133
Compare to the stock rubber bushing these made noticeable difference in firmness. I have replaced all my bushings with energy and will the same to all my vehicles.
5 out of 5 - Love Them
Tricia Gesek - . Energy Suspension 4.3133
Easy replacement... stiffened ride alot. Took out all my extra play in ttb
5 out of 5 - good quality
charles kusse - . Energy Suspension 4.3133
The product is very well made and a great improvement over the stock ride.
5 out of 5 - very well made
Ritchie Putnam - . Energy Suspension 4.3133
They fit great and used my -high dollar- press... 8 ton bottle jack under a $45k double-wide trailer. ;D Alvin in AZ
5 out of 5 - Used my press
Alvin Johnston - . Energy Suspension 4.3133