Replacement Tie Rod Dust Boots - Polyurethane 9.13101

  • 9.13101 360image 1
  • 9.13101 Front Tie Rod Dust Boots
  • 9.13101 Front Tie Rod Dust Boots
  • 9.13101 Front Tie Rod Dust Boots
  • 9.13101 Front Tie Rod Dust Boots
  • 9.13101 Front Tie Rod Dust Boots
  • 9.13101 360image large 1

Front Tie Rod Dust Boots

Manufacturer: Energy Suspension
Part Number: 9.13101

:(?)
Black
Red

:(?)
No Thanks
Yes

:(?)
Free Lifetime Warranty Upgrade
Price: $4.91

check_box In Stock check_box Ships Immediately


  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 9.13101 to 191712
Prothane 191712
Polyurethane.
Price: $3.85
Warranty: Lifetime Warranty

Cross Reference from 9.13101 to ku13001bk
Daystar ku13001bk
Polyurethane.
Price: $11.02
Warranty: Lifetime Warranty

Cross Reference from 9.13101 to 9.13102
Energy Suspension 9.13102
Polyurethane. Octagon Style
Price: $5.06
Warranty: 7 Year Warranty

Cross Reference from 9.13101 to 9.13107
Energy Suspension 9.13107
Polyurethane. 12 Pack
Price: $29.09
Warranty: 7 Year Warranty

Cross Reference from 9.13101 to 9.13113
Energy Suspension 9.13113
Polyurethane. 50 Pack
Price: $94.29
Warranty: 7 Year Warranty

FitmentFront Tie Rod Dust Boots 9.13101 fits these vehicles:
Details
Polyurethane Tie Rod Dust Boots
At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod!

Replacement Tie Rod Dust Boots - Polyurethane 9.13101

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
14mm
(0.55 inch)
34.55mm
(1.36 inch)
25.25mm
(0.995 inch)
13001
Here is our complete list of universal dust boots.
Polyurethane Tie Rod Dust Boots
  • Repair torn and worn-out boots of suspension tie rod ends without having to buy the entire and expensive tie rod!
  • Adds durability surpassing most OEM rubber boots.
  • Exclusive 5 point sealing action.
  • Resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber boots.
  • Made of Energy's HYPERFLEX performance polyurethane for added performance and durability
Footnotes
  • Includes 2 Boots Per Package.

Energy Suspension Polyurethane Universal Dust Boots

Importance of Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Energy Suspension makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

Energy Suspension Universal Dust Boots
Energy Suspension Universal Dust Boots

How to get your measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call.

It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Choose your design

Energy Suspension offers an alternative to the traditional round bushing. There is an octagon shaped dust boot available as an option. The octagonal boots have the same specifications and perform the exact thing. They just offer a more unique look.

Energy Suspension Universal Dust Boots
Energy Suspension 9.13101

Product Reviews for Replacement Tie Rod Dust Boots - Polyurethane 9.13101

5 Star (124)
95%
4 Star (3)
2%
3 Star (2)
2%
2 Star (2)
2%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.13101

5 out of 5 based on 131 user reviews. Write a Review

D
verified_user

starstarstarstarstar" The Dust Boots work well for my SUnbeam Alpine . "

I am well pleased with the Boots. I shall pass on to other Sunbeam Alpine owners that the boots will do well as replacements. Thank you.

verified_user Verified Buyer - - . Energy Suspension 9.13101 - 5 out of 5
T
verified_user

starstarstarstarstar" Review 2 Years Later "

I used them on my 74 VW bug which took me a few years to complete. since completion I have only put about 100 miles in so your boots havent been tested by rough conditions, They are holding up very well.

verified_user Verified Buyer - - . Energy Suspension 9.13101 - 5 out of 5
D
verified_user

starstarstar_borderstar_borderstar_border" Review 1 Year Later "

Working great!!

verified_user Verified Buyer - - . Energy Suspension 9.13101 - 2 out of 5
S
verified_user

starstarstarstarstar" A good product does what its supposed to do "

Well-made products thats good easy installation.

verified_user Verified Buyer - - . Energy Suspension 9.13101 - 5 out of 5


Measurements from a real person!

9.13101 Measurements

For most of the world that's 14.61 millimeters.

9.13101 Measurements

For most of the world that's 34.81 millimeters.

9.13101 Measurements

For most of the world that's 24.13 millimeters.

Fitment for 9.13101

compare_arrows Compare with Similar Parts


This Part
9.13101 compare
$4.91
Prothane
Prothane compare
$3.85
($1.06) cheaper
Daystar
Daystar compare
$11.02
($6.11) more expensive
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane
Energy Suspension
Energy Suspension compare
$5.06
($0.15) more expensive

question_answer Customer Questions and Answers


Question:
Do you sell the ball joint dust boots for my 1985 Chevy s10 2wd?
Answer:
No, we do not offer the ball joint dust boots for the 1985 Chevy s10 2wd.

Question:
Is part number 9.13101 a replacement dust boot or does it slip over the rubber dust boot for added protection?
Answer:
Part number 9.13101 is the replacement dust boot.