• 9.13105 Tie Rod Dust Boots
  • 9.13105 Tie Rod Dust Boots
  • 9.13105 Tie Rod Dust Boots

Tie Rod Dust Boots

Part Number: 9.13105
Manufacturer: Energy Suspension
Rating 13

Options


Black
Red
Octagon Style Boots: (Learn More)
No Thanks
Yes
Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $3.31

In Stock Ships Immediately


 
Details
Polyurethane Tie Rod Dust Boots
At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod!

Outer Tie Rod Dust Boots - Mazda RX7 - 9.13105

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
13mm (0.511 inch) 36.35mm (1.43 inch) 24mm (0.945 inch) 13005
Here is our complete list of universal dust boots.
Polyurethane Tie Rod Dust Boots
  • Repair torn and worn-out boots of suspension tie rod ends without having to buy the entire and expensive tie rod!
  • Adds durability surpassing most OEM rubber boots.
  • Exclusive 5 point sealing action.
  • Resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber boots.
  • Made of Energy's HYPERFLEX performance polyurethane for added performance and durability
Footnotes
  • Includes 2 Boots Per Package.
Energy Suspension Tie Rod Dust Boots allow you to replace a damaged tie rod dust boot without buying an entirely new tie rod just for the dust boot. Additionally an alignment is not required because the tie rod is not adjusted out of place as it would be if the tie rod were simply replaced.

Energy Suspension Tie Rod Dust Boots have a 5 Point Sealing Action, which prevents loss of tie rod lubricant and also inhibits contamination from foreign material.

 

 



Part Image(a) Pin Opening Diameter(b) Base DiameterHeight
Universal Dust Boot 1300513 mm (0.511 inch)36.35 mm (1.43 inch)24 mm (0.945 inch)
  • 2 - 13005 Dust Boots


 energy logoEnergy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Alternate Part Numbers for 9.13105
  • ENE-9.13105G
  • ENE-9.13105R
  • ENS-9-13105G
  • ENS-9-13105R
  • 913105G
  • 913105R

Energy Suspension 9.13105

Product Reviews for Outer Tie Rod Dust Boots 9.13105

Energy Suspension 9.13105



5 out of 5 based on 13 user reviews. Write a Review

Very Happy.
5 out of 5 - Review 1 Year Later
Joshua Hofer - . Energy Suspension 9.13105
These tie rod boots fit perfectly and look great. It was great to choose them by size because my car is never listed.
5 out of 5 - Great product
James Bruni - . Energy Suspension 9.13105
Quality part. Reasonable delivery time. Would advise others to by from this company.
5 out of 5 - Very good
Thomas E Anderson - . Energy Suspension 9.13105
Replaced my old Tie Rod Dust boots on my Alfa Romeo Montreal -72 (Pro Touring) track day car.\n\nThey work really great and fit perfect.\n\nOnly thing was that i have to tie them at the base with plastic straps so they not moving around. Editors Note: Universal dust boots may not fit as snug as the ones that originally were fitted to the part. That is why accurate measurements are critical.
5 out of 5 - Work really great
Reine Agapuu - . Energy Suspension 9.13105
These fit the tie rods on my 63 T-Bird great.
5 out of 5 - Great
Casey Quillen - . Energy Suspension 9.13105
This part works well and fits properly for the tie rods. It does not work for the ball joint boots even though it is listed for them.
5 out of 5 - Good
George Robertson - . Energy Suspension 9.13105
Fit perfectly on the tie rod ends of my TCI Model A chassis to replace the torn originals.
5 out of 5 - terrific!
Paul Sturtz - . Energy Suspension 9.13105
They looked too small until I installed them, but they fit and look great.
5 out of 5 - Good
Tim Garrison - . Energy Suspension 9.13105
Had a torn boot on a ball joint on my 86 944. Replaced it with a part I found at the local CarQuest, that part lasted only a few months and then wased and distorted. Researched Ball joint repair kits for 944 and found the ES part number. So far I'm pleased, the part fits well and I'm expecting it to last a long time.
5 out of 5 - Look good but time will tell.
Craig Christensen - . Energy Suspension 9.13105
Fit to my 1998 Dakota was good, not an exact fit but close. Seals my ball joint except on tight turning situations. Almost pops off the ball joint. This is way better than the split trashed old boots. Stops dirt and water quite well. Should extend my ball joint life considerably. Allows me to grease the ball joint by installing quality grease in the boot before installation of boot. Here is a tip remove the old boot and old boot clamp springs and clean out all old grease and dirt 100% before installing new boot and grease. Ball joint can now be greased with a grease needle fitted to grease gun.
5 out of 5 - Good overall fit very happy with parts
Jeff M Stewart - . Energy Suspension 9.13105
Parts worked great, recommend
5 out of 5
mario castro - . Energy Suspension 9.13105
Boots were a good design and material. Would purchase again in needed.
5 out of 5
curtis auten - . Energy Suspension 9.13105
I found these incredibly useful. I tore the tie rod boot on my girlfriends Prius when I was changing the wheel bearing. I did a quick measurement of the tie rod end dust boot and found the right universal one pretty easily. They are so well designed because they expand over the tie rod end and in getting squished between the spindle and the tie rod end it forms a nice seal. Highly recommended
5 out of 5 - Well worth it!
Christopher Errante - . Energy Suspension 9.13105