• 9.8103 End Link Grommets - Truck
  • 9.8103 End Link Grommets - Truck
  • 9.8103 End Link Grommets - Truck

End Link Grommets - Truck

Part Number: 9.8103
Manufacturer: Energy Suspension
Rating 21


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $6.19

In Stock Ships Immediately


Polyurethane Sway Bar End Link Grommets

Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!



Polyurethane Sway Bar End Link Grommets

  • Your vehicle's sway bar system will work at its maximum efficiency!

  • Replaces that original, short lived and too-soft rubber.

  • Easy to install with basic tools.

  • Made of rugged Energy's HYPER-FLEX™ performance polyurethane material and the hardware is heavy duty–for lasting durability.

  • Universal - Set of 4

  • Inner Diameter - 7/16"

  • Nipple Outer Diameter - 7/8"

  • Outer Diameter - 1-1/4"


  • 4 - 4802 Grommets
  • I.D.- 7/16"
  • Nipple O.D.- 7/8"
  • O.D.- 1-1/4"

 energy logoEnergy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Alternate Part Numbers for 9.8103
  • ENE-9.8103G
  • ENE-9.8103R
  • ENS-9-8103G
  • ENS-9-8103R
  • 98103G
  • 98103R

Energy Suspension 9.8103

Product Reviews for 9.8103

Energy Suspension 9.8103

5 out of 5 based on 21 user reviews. Write a Review

I knew the inside diameters were too short to fit my end link bolts. I drilled the Grommets out using a sharp 1/2" bit. They finished slightly smaller ID but fit the bolts snugly. I replaced all 8 grommets on the rear end links. After installation, my 14 ton motorhome handles GREAT! Body sway is significantly reduced, it corners like its on rails! The rear sway bar is about 2 1/2 inches in diameter so you know theres a lot of force available. If needed, I will replace these grommets with the same part.
5 out of 5 - Nice, well made and SOLID!
Charles A Goodman - . Energy Suspension 9.8103
The overall quality of these Grommets far exceeds the cheap rubber ones you get in the Auto Parts Store. Will last the remaining life of my Explorer, and then some!
5 out of 5 - Simply an Outstanding product, could not have been happier! Thanks so much!
Ronald Schmidt Jr. - . Energy Suspension 9.8103
They are still holding up. Excellent performance. These out perform the factory rubber and the semi-poly plastized type. That you get at aftermarket parts stores. I always use this type for replacments or performance. I also replaced my cab to frame, with this type. Gives a solid and connected feel to the road.
5 out of 5 - Review 2 Years Later
Stark - . Energy Suspension 9.8103
Still appear and act like I just installed them. No noticeable wear or degrading of performance observed..
5 out of 5 - Review 1 Year Later
Bruce Richardson - . Energy Suspension 9.8103
The aftermarket replacement bushings fit and performed exactly as advertised. I am very satisfied with these parts and would definitely purchase them again if I ever need them
5 out of 5 - Review 2 Years Later
Kevin Wickstrom - . Energy Suspension 9.8103
Excellent product. These End Link Grommets are high quality and have held up perfectly, still like new!!\nAftermarket Suspension Parts.com has great customer support and service!!
5 out of 5 - Review 1 Year Later
JOHN DELFINO - . Energy Suspension 9.8103
These Energy Suspension bushings are far superior than the oem rubber end-link bushings. I had to get slightly longer bolts to accommodate them. No big deal and worth the effort.
5 out of 5 - Excellent!
Kevin Houle - . Energy Suspension 9.8103
as expected
3 out of 5 - good
Joe Price - . Energy Suspension 9.8103
These bushings are of very good quality and a lot of bang for the buck. They worked just as they should and the shipping was very quick. I will buy some of these for my other vehicles soon. I now have around 800 miles on them and they must not be made in china because they still look like the day i installed them.
5 out of 5 - Great parts for a great price
Terry Tanner - . Energy Suspension 9.8103
Still appear and act like I just installed them. No noticeable wear or degrading of performance observed..
5 out of 5 - Review 1 Year Later
Bruce Richardson - . Energy Suspension 9.8103
Thank you very much for the parts being as accurate as they were. For my more than odd application, they fit perfectly.
5 out of 5 - excellent
Jaime Cadet - . Energy Suspension 9.8103
I installed bushings and I'm very satisfied. Also in comparison to the red in color bushings these seem to be a lot better (red also made from energy suspension).
5 out of 5
Louis Amendola - . Energy Suspension 9.8103
Blew out two pairs of the soft rubber blue Moog end link bushings (K7275) in less than one year. Replaced with the Energy Suspension 9.8103G poly grommets. More than two years later, still mint.
5 out of 5 - Huge Improvement Over the Rubber Moog Blue GrommetssRMoog
swshawaii - . Energy Suspension 9.8103
As advertised, on time
5 out of 5
Karen Lamb - . Energy Suspension 9.8103
These were purchased for a 1994 Foretravel U240 for the front and rear sway bar ends. I guessed wrong on the size - they were too thick and the protrusion on the top too wide. I used a Dremel with a metal cutting disk to reduce the thickness of the protrusion and cut the thickness to about 2/3 of original. Installation was pretty easy, and the grommets seem to be of excellent quality. A good choice for the application, better if you can get the exact size. Received the order crazy fast.
5 out of 5
Matthew L Bruner - . Energy Suspension 9.8103
Completely satisfied
5 out of 5 - excellent
Barry Gedris - . Energy Suspension 9.8103
Super flexible, easy to install. I've only had them a few months so I can't comment on longevity but so far so good.
5 out of 5 - great parts
Eric Fritz - . Energy Suspension 9.8103
I've replaced my stabilizer bushings in my Mountaineer twice already in less than 3000 miles. Then I installed Energy Suspension bushings. 10,000 miles and not a or any signs of falling apart! AAAA++++
5 out of 5
Terry - . Energy Suspension 9.8103
I use them on my PT Cruiser for the front sway bar end links and they are a great improvement.
5 out of 5 - Perfect
Marco Boegborn - . Energy Suspension 9.8103
These bushings are a replacement for the stock rubber ones used on our diesel pusher motorhome. We haven't yet a chance to road test them yet but I'm sure they will be far better than the oem units that were really worn and eroded away in only 26k miles. I think the mfg. (Safari/Magnum) was asking way too much out of this size bushing for a vehicle with 26k gvw and a 1 3/4" rear sway bar and a front of almost the same diameter! This will be a test for sure of your product. Hope to be on the road soon! Rick
5 out of 5 - good, I guess
Rick Lee - . Energy Suspension 9.8103
The grommets appear to be working fine. We were traveling some rough gravel in the BWCA and they held up. Thanks
5 out of 5
roger schurke - . Energy Suspension 9.8103