add_shopping_cart Suggested Parts 2keyboard_arrow_down
3 - 5ML High Performance Grease by Energy
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 16.5146 | Front Sway Bar Bushings - 28mm | Honda Civic 2006-2011
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 16.5146
starstarstarstarstar" Fits my 2009 Honda civic si perfectly "
Measured the front sway bar with calipers then picked these bushings (28mm), they fit perfectly, however, it is a pain getting the bracket bolts back in, be sure and have a powered torque driver to make the bolt install easier. If Honda had made the bracket bolts 5mm longer, front and back, the install would be painless. Once installed (front and back) the steering and tracking down the highway is 100 times better, with no drift across lanes when you take your hands off the steering wheel, I should have replaced the bushings years ago. (Be sure and match L & R to the old bushings and do not install them backwards!!!!)
verified_user Verified Buyer - Randy E Wright - . Energy Suspension 16.5146 - 5 out of 5starstarstarstarstar" Fits my 2009 Honda civic si perfectly "
Measured the front sway bar with calipers then picked these bushings (28mm), they fit perfectly, however, it is a pain getting the bracket bolts back in, be sure and have a powered torque driver to make the bolt install easier. If Honda had made the bracket bolts 5mm longer, front and back, the install would be painless. Once installed (front and back) the steering and tracking down the highway is 100 times better, with no drift across lanes when you take your hands off the steering wheel, I should have replaced the bushings years ago. (Be sure and match L & R to the old bushings and do not install them backwards!!!!)
verified_user Verified Buyer - Randy E Wright - . Energy Suspension 16.5146 - 5 out of 5