unarchive In The Box of 3.3162 keyboard_arrow_down
- 2 - 3008 lower control arm bushings (rear position).
- 2 - 15.10.10.39 (3/4”O.D. x 1/2”I.D. x 2.40” sleeve).
- 2 - 15.02.02.39 “B” shells.
- 2 - 3224 lower control arm bushings (front position).
- 2 - 15.10.08.39 (3/4”O.D. x 9/16”I.D. x 3.00” sleeve).
- 2 - 15.02.11.39 “K” shells.
- 4 - 3293 upper control arm bushings.
- 4 - 15.10.50.39 (7/8”O.D. x 11/16”I.D. x 1.80” sleeve).
- 4 - 15.02.16.39 “P” shells.
- 1 - 17019 installation instructions.
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for Front Control Arm Bushing Kit | S10 Pickup 82-04
- 5 Star (14)
-
-
- 93%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 7%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.3162
starstarstarstarstar" whoo hoo "
Iv been in automotive restoration for 36years, and this was so easy-to-use they almost installed themselves. I guess you could say a blind trained monkey could do it. \nThank to your whole team\n
verified_user Verified Buyer - Leon H. Campbell - . Energy Suspension 3.3162 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
I just installed the bushing kit on my 1995 S10 p/u Base v6 auto. the truck rides like new. a good solid feel.
verified_user Verified Buyer - Michael E Cullimore - . Energy Suspension 3.3162 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Two years and still going.
verified_user Verified Buyer - Miguel Gallardo - . Energy Suspension 3.3162 - 5 out of 5starstarstarstarstar" whoo hoo "
Iv been in automotive restoration for 36years, and this was so easy-to-use they almost installed themselves. I guess you could say a blind trained monkey could do it. \nThank to your whole team\n
verified_user Verified Buyer - Leon H. Campbell - . Energy Suspension 3.3162 - 5 out of 5| Materials, color & finish | |
|---|---|
| Bushing Material | Polyurethane |
| Bushing Color | Black Red |
| What's included | |
|---|---|
| Bushings Included | Yes |
| Mounting Hardware Included | No |
compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- I have a pair of bushings, piece number 3008 from kit number 3.3162 and piece number 3217 which is an extra bushing I have. Where do these bushings go?
- Answer:
- Both the 3008 and 3217 go to the lower control arm.
- Question:
- is this kit for right & left side upper & lower ,??
- Answer:
- Energy kit 3.3162 will replace the front upper/lower left and right upper and lower control arm bushings.
