3.5170 | Front Sway Bar Bushings - 30 mm | Chevrolet Beretta

 No Images

Front Sway Bar Bushings - 30mm (1.18 inch)

Manufacturer: Energy Suspension
Part Number: 3.5170

Made in Black Only: (?)
Black

Exclusive for DST Customers: (?)
Free Lifetime Warranty Upgrade
Price: $13.32

check_box In Stock check_box Ships Immediately


Suggested part for 3.5170: 9.8117_front
9.8117_front Front Sway Bar End Links 98117
The endlinks are the other main connection between your sway bar and your vehicle. Make sure you replace the endlinks at the same to to receive the maximum handling benefit from the new sway bar bushings.

Suggested part for 3.5170: kll130
kll130 Sway Bar Lateral Lock - 28-30mm
Sway Bar Lateral Locks will not only improve the effectiveness of the sway bar, but will also prevent the bar from contacting and damaging other parts of the suspension.

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 3.5170 to 71162
Prothane 71162
Polyurethane.
Price: $11.97
Warranty: Lifetime Warranty

FitmentFront Sway Bar Bushings - 30mm (1.18 inch) 3.5170 fits these vehicles:
Details
Polyurethane Front Sway Bar Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

3.5170 | Front Sway Bar Bushings - 30 mm | Chevrolet Beretta

Only Fits 30mm Bar
Polyurethane Front Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Formula 5 Gif
Fitment for 3.5170

compare_arrows Compare with Similar Parts


This Part
3.5170 compare
$13.32
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Polyurethane
Prothane
Prothane compare
$11.97
($1.35) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane