unarchive In The Box of 3.5175 keyboard_arrow_down
- 2 - 5352 - 1 1/16" Sway Bar Bushings
- 2 - 5062 - 1 1/16" Sway Bar Bushings
- 2 - Outer Brackets for 5062
- 2 - Outer Brackets With Zerk Grease Fittings for 5352
- 8 - Metal Washers
- 1 - 911108 Formula 5 Prelube
- 1 - Installation Instructions - #17145
- 1 - Installation Instructions - #17151
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.5175 | Front Sway Bar Bushings - 26.9 mm | Chevrolet C10
- 5 Star (14)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.5175
starstarstarstarstar" Good fit, no imperfections. What I expected them to be "
If you you have a 60-66 c20 with a 1-1/16 inch front sway bar. This is what you want. Energy suspension has a reputation for a reason. Look no further.
verified_user Verified Buyer - Austin Currier - . Energy Suspension 3.5175 - 5 out of 5starstarstarstarstar" Very well made. Great price point. "
These sway bar bushings and mounts fit my application very well. Although my project truck is a bit of a hybrid nevertheless these worked great. They were installed on the front sway bar of a 1965 Chevy 1 ton truck with a 1978 Chevy 1 ton truck front cross member and suspension. Thanks again for the quick delivery and quality parts. Jim
verified_user Verified Buyer - Jim Johnstone - . Energy Suspension 3.5175 - 5 out of 5starstarstarstarstar" Easy Install "
Nice parts work great.
verified_user Verified Buyer - Daniel Popp - . Energy Suspension 3.5175 - 5 out of 5starstarstarstarstar" Very well made. Great price point. "
These sway bar bushings and mounts fit my application very well. Although my project truck is a bit of a hybrid nevertheless these worked great. They were installed on the front sway bar of a 1965 Chevy 1 ton truck with a 1978 Chevy 1 ton truck front cross member and suspension. Thanks again for the quick delivery and quality parts. Jim
verified_user Verified Buyer - Jim Johnstone - . Energy Suspension 3.5175 - 5 out of 5