unarchive In The Box of 3.5207 keyboard_arrow_down
- 8 - End Link Bushing
- 8 - Dished Washer
- 2 - Metal Sleeve
- 2 - Hex Cap Bolt
- 2 - Nylon Hex Nut
- 4 - Flat Washer, Small
- 2 - Regreasable Sway Bar Bracket
- 2 - 5355 - Regreasable Sway Bar Bushing, 33mm
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.5207 | Front Sway Bar Bushings-Endlinks - 33 mm | S10 Pickup
- 5 Star (32)
-
-
- 94%
-
- 4 Star (1)
-
-
- 3%
-
- 3 Star (1)
-
-
- 3%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.5207
starstarstarstarstar" Review 2 Years Later "
Still holding up well on my lifted ZR2 even after being disassembled and reassembled many times.
verified_user Verified Buyer - Dawson Young - . Energy Suspension 3.5207 - 5 out of 5starstarstarstarstar" Very nice but the endlinks do not fit a zq8 s10 "
I got these because it said they were for a 2000 zq8 s10, there not, the sway bar bushings fit but the end links are to short, overall still very nice products I ended up doing more research and ordered the right end links
verified_user Verified Buyer - David Lawson - . Energy Suspension 3.5207 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
So far so good. The quality of the parts was top-notch. The urethane bushings are quiet they dont squeak. I did use the silicone grease that was included and have done maintenance on them a few times. Would definitely do business with suspension.com again.
verified_user Verified Buyer - Christopher R Linhart - . Energy Suspension 3.5207 - 5 out of 5starstarstarstarstar" Very good quality item. I am very happy with this purchase! "
Very good quality item. I am very happy with this purchase! They were easy to install and they fit right on my 1997 GMC Jimmy!
verified_user Verified Buyer - Andrew B - . Energy Suspension 3.5207 - 5 out of 5