unarchive In The Box of 4.7128 keyboard_arrow_down
- 2 - 8268 - Track Rod Bushings for One Piece Cast Style Arm
- (O.D. 44mm x Pre-Flange Length 33.99mm x Total Length 40.11mm x Bolt 20mm)
- 2 - 8327 - Track Rod Bushings for Welded Steel Style Arm
- (O.D. 44mm x Pre-Flange Length 31.73mm x Total Length 43mm x Bolt 20mm)
- 2 - Metal Sleeves
- 2 - 911108 Formula 5 Prelube
- 1 - Installation Instructions - #17433
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Front Track Bar Bushings 99-04 Ford F250 Super Duty 4WD
These Front Track Bar Bushings fit the 20MM bolt on the F250 4WD Super Duty 1999-2004 and replace the original rubber bushings that wear down with time and degrade when exposed to the elements. If your track bar bushings are worn down you can experience steering wander or wobble and excessive vibration and noise from the front of your F250. You can fix this by upgrading to polyurethane track bar bushings.
Worn Track Bar Bushings
The front track arm (or Panhard bar) stands between the frame and the axle and allows the axle to travel with the movement of your suspension without twisting, so your wheels keep pointing straight ahead. At each end of the track bar there are rubber bushings that hold the bar in place and absorb vibration, but these bushings are not very durable and can begin to hollow out.
When those bushings wear down, the bar can shift and allow the axle to move and cause steering wander or even abnormal tire wear. To reset and maintain the axle's position worn bushings must be replaced, but do you want to install more rubber bushings that will eventually wear down like the originals?
Covers Both Styles of Track Arms
Energy Suspension offers these Front Track Arm Bushings which are made of polyurethane and hold the axle in alignment through rough driving for much longer than the original rubber bushings. This kit includes the bushings for the welded steel track arm and the one piece cast arm, either of which could come stock on your 99-04 F250 Super Duty. Polyurethane is a more dense material and so it doesn't absorb as much road vibration as rubber, but it does a much better job of holding the axle in alignment.
Whether you're hauling lumber down I20, or taking back roads in Erath County, Texas to the deer lease, you don't want to be constantly correcting your steering because your front axle is cock-eyed.
More Durable Upgrade
Besides doing a better job of holding front axle alignment Polyurethane track bar bushings are more resistant to wear than rubber. Poly bushings won't degrade with exposure to road salts, coastal climate, or motor chemicals like rubber will. Here at Suspension.com we believe these bushings will last the life of your Ford and we back that up with an exclusive lifetime warranty that we will handle for you in house.
So if you're looking for a durable, longer lasting bushing to keep that front axle aligned then Energy Suspension's polyurethane track bar bushings will outlast and out-perform the originals.
Product Reviews for 4.7128 | Front Track Arm Bushings - 20mm | 99-04 F250 Super Duty
- 5 Star (13)
- 4 Star (1)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 4.7128
starstarstarstarstar" Nice and Durable no play ! "
Very impressed on shipping WOW Fast !\nProduct is A+++++++verified_user Verified Buyer - paul thomas - . Energy Suspension 4.7128 - 5 out of 5
starstarstarstarstar" Great!!! "
The hardest part was removing the old bushings Whew that was a job. The energy bushings needed just a little trimming on one side to press them in. Because my 2002 f250 came with Moog track bar. Total time was about 3.5 hours start to finish. Dont forget to re torque per ford manual. If you dont have access to big torque wrench go to a tractor maintenance place they usually have a torque multiplier. Only takes minutes and saves a lot of money compared to Ford. Great product.verified_user Verified Buyer - Brian Middleton - . Energy Suspension 4.7128 - 5 out of 5
starstarstarstarstar" very good "
The part was a correct fit for my 2000 f250 superduty. The quality seems very good. The instructions were good. Fortunately I have a neighbor that has a good shop press. I think this would be a very difficult project to do without a press.verified_user Verified Buyer - gene miller - . Energy Suspension 4.7128 - 5 out of 5
starstarstarstarstar" fantastic "
Took a little doing to get them in, a press is the way to go. Track bar on top of bushing, pressing downward onto the bushing was the way to go. All in all they are a good tight fit.verified_user Verified Buyer - martin p mendoza - . Energy Suspension 4.7128 - 5 out of 5