moog-513253_rear | Rear Wheel Bearing and Hub Assembly | Audi A3

  • moog-513253_rear Rear Wheel Bearing and Hub Assembly
  • moog-513253_rear Rear Wheel Bearing and Hub Assembly

Rear Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-513253_rear
Price: $186.79

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentRear Wheel Bearing and Hub Assembly moog-513253_rear fits these vehicles:
Details

moog-513253_rear | Rear Wheel Bearing and Hub Assembly | Audi A3

Premium Moog Wheel Bearing and Hub Assembly
A complete wheel bearing and hub assembly that provides a simple, fast, cost efficient replacement of your old worn wheel bearings.

Volkswagen CC 2009-2015
For AWD models
  • For FWD models use 512319.
  • Volkswagen Passat 2006-2010
    For AWD models
  • For FWD models use 512319.
  • Audi A3 Quattro 2009-2013
    For AWD models

    Audi Q3 Quattro 2015-2018
    For AWD models

    Audi TT Quattro 2008
    For AWD models

    Audi TT Quattro 2009-2011
    For S Models and AWD base models

    Audi TT Quattro 2012-2013
    For S Models and AWD Premium Plus and Prestige models

    Audi TT Quattro 2014-2015
    For S Models and AWD base models

    Volkswagen CC 2009-2015
    For and AWD models

    Volkswagen Passat 2006-2010
    For and AWD models

    Volkswagen Passat CC 2009-2010
    For and AWD models

    Volkswagen Tiguan 2009-2017
    For and AWD models

    Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

    Moog Wheel Bearing and Hub Assemblies

    Don't Live With All of Those Noises

    Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    OE Design Flaws

    The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

    • Loose wheels leaning into the vehicle
    • Premature tire wear and poor handling
    • Snapping or clicking noise on turns
    • Humming or rattling when driving straight
    • Anti-lock Braking System (ABS) light is on

    If you are experiencing any of these issues, get your vehicle checked out immediately.

    Roll Form Design

    All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    ABS Molded Shield and Socket Connections

    Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

    Moog Abrasion-Resistant ABS Cord

    Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    Quad Lip Seal Design

    Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

    Precision Match Components

    When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

    Moog wheel bearing and hub assembly
    Moog wheel bearing and hub assembly

    Coated Wheel Stud Bolts

    The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

    Parts Engineered to the Highest of Standards

    Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

    Moog wheel bearing and hub assembly

    question_answer Customer Questions and Answers


    Question:
    Can I use the moog-513253_rear for the rear hubs on my 2011 Jetta with Torsion beam suspension?
    Answer:
    Unfortunately the moog-513253_rear is not fitted for your Jetta, at this time (3/12/19) I am showing Moog does not offer a rear hub assembly for the Torsion Beam suspension 2011 Jetta.