unarchive In The Box of 4.4107 keyboard_arrow_down
- 2 of 4063 - Rear Cab Mounts - Upper Half
- 2 of 4064 - Rear Cab Mounts - Lower Half
- 2 of 4061 - Front Cab Mounts - Upper Half
- 2 of 4062 - Front Cab Mounts - Lower Half
- 2 of 4065 - Core Mounts - Upper Half
- 2 of 4060 - Core Mounts - Lower Half
- 2 of 15.03.05.39 - Metal Washers
- 1 of 17027 - Installation Instructions
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
4.4107 | Ford Body & Radiator Mounts
Energy Suspension's Complete Polyurethane Body & Radiator Mounts for your 2WD or 4WD 1980-1996 Ford F100, F150, F250 & F350, will not break down over time like alternative materials. This kit will keep your cab and radiator properly aligned, ensure that your doors shut properly and will save you money. With quick and easy installation times you can get your Ford's mounts replaced and back on the road in no time.
Built Tough
Body Mounts are meant to maintain proper alignment/isolate chassis noise, Radiator Mounts maintains the proper distance between your radiator and engine. Both play a very important role in your Ford, but when OE mounts are put up to these tasks they begin to fail putting you and your passengers and your truck at risk. Energy's HYPER-FLEX performance polyurethane allows maximum efficiency while extending the life of your bushings.
Polyurethane bushings can take a beating out in the fields or on the road and still give you an easy ride. OE bushings are soft and prone to cracks and melting not to mention it costs upwards of $300 for a full OE mount replacement. Energy's polyurethane mounts will allow you to use your OE hardware, last the life of your Ford and save you money.
4.4107 Lifetime Guarantee
If you're looking to save money and give your Ford a better ride, then Energy Suspension's Polyurethane Body & Radiator Mounts are just what the doctor ordered.
Here at Suspension.com we have upgraded Energy's 2-yr warranty to a Lifetime Warranty at no charge to you. Not to mention our ASE certified mechanic and expert customer service team you can call or live chat with, to answer all of your suspension questions!
Product Reviews for 4.4107 | Body Mount and Radiator Bushings - Ford F150 F250 F100
- 5 Star (16)
-
-
- 94%
-
- 4 Star (1)
-
-
- 6%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 4.4107
starstarstarstarstar" Review 1 Year Later "
Parts worked perfect would reorder. Love the parts still going strong!!
verified_user Verified Buyer - jeff litzenberg - . Energy Suspension 4.4107 - 5 out of 5starstarstarstarstar
I would be willing to pay more if you provided all of the hardware. Going around to find the right washers spacers and nuts and bolts is a pain. \n\nProduct is as advertised.
verified_user Verified Buyer - William Walker - . Energy Suspension 4.4107 - 5 out of 5starstarstarstarstar" Great product . Replaces OEM well . "
So far so good! They still need the test of time.
verified_user Verified Buyer - Lance Kryski - . Energy Suspension 4.4107 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Couldnt be happier!
verified_user Verified Buyer - Raul Gonzalez - . Energy Suspension 4.4107 - 5 out of 5compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- Does this set replace cab and bed mounts?
- Answer:
- Your vehicle doesn't use mounts in the bed the same as it does on the cab. Typically the bed is mounted directly to the frame instead of using an isolator. If anything, your bed might use a small strip of rubber between the bed and the frame. If you need to replace that as well, you might try something like this product here. ...see more
- Question:
- Will these work on the front body/frame. i have heard them be called a "radiator core support bushings" but all i know is is that i need the front two bushings that are on either side of the engine bay and am wondering if these will fit the bill.
- Answer:
- Yes, this set includes the core support bushings as well. It will cover all the frame mount positions.
- Question:
- Can i use this kit in conjunction with a body lift kit?
- Answer:
- As long as the body lift kit still uses the OE body mount bushings, these will work fine. These are designed to replace the OE body mount bushings to OE specs.
- Question:
- Is there a hardware kit available for this body mount set?
- Answer:
- Unfortunately there is no hardware kit for this body mount kit at this time.
- Question:
- Does the bushing kit come with the bolts for the core support bushings?
- Answer:
- No, part number 4.4107 only comes with 2 of 4063 - Rear Cab Mounts - Upper Half 2 of 4064 - Rear Cab Mounts - Lower Half 2 of 4061 - Front Cab Mounts - Upper Half 2 of 4062 - Front Cab Mounts - Lower Half 2 of 4065 - Core Mounts - Upper Hal lf 2 of 4060 - Core Mounts - Lower Half 2 of 15.03.05.39 - Metal Washers 1 of 17027 - Installation Instructions ...see more
- Question:
- What is the hardness of part number 4.4107? And is there any difference in the stiffness between the red and black?
- Answer:
- Part number 4.4107 has a durometer of 85A. There is not difference in the stiffness between the red and black, the only difference between the two is just the color.
- Question:
- After installing the bushings, the Cab sits a little higher than the Bed (the body lines and trim dont align). Should I tighten more on the mounting bolts to squish the poly mounts (how much can I tighten)? How much will these poly bushings squish (like 3/4
- Answer:
- Factory specs are called for, refer to your vehicle manual or Chilton's manual for the correct specs.
- Question:
- I am looking for the hardware to install these bushings. Bolts nuts washers and sleeves
- Answer:
- This body mount bushing kit does not come with hardware. The set that comes with hardware is 4.4123
- Question:
- Does part number 4.4107 come with everything I would need?
- Answer:
- Part number 4.4107 comes with everything except the new hardware.
- Question:
- I purchased kit 4.4107. All the hardware on the truck is not usable. Is there a list of hardware or a kit that I will need to install the radiator support?
- Answer:
- Energy does make the hardware come in this kit 4.4123 https://www.suspension.com/4.4123. However, we can get you all the individual pieces of hardware from the kit Just call to place the order at 888-406-2330.
- Question:
- Does your bushing kit come with nuts and bolts to or do I have to purchase separately?
- Answer:
- 4.4107 body mount bushing kit is the bushings only, this kit does not have a hardware kit available at this time.
- Question:
- Does your bushing kit come with nuts and bolts to or do I have to purchase separately?
- Answer:
- No part number 4.4107 does not come with the hardware.
- Question:
- Will part number 4.4107 work on my 1997 F350 4wd?
- Answer:
- Yes, part number 4.4107 will fit the 1997 F350 4wd.
- Question:
- Are the core bushings in this kit for mounting the core support to the frame?
- Answer:
- Yes they are.
- Question:
- Wil part 4.4107 fit a 1997 F-250 4X4 SuperCab long bed?
- Answer:
- No, it will not. The correct part that is fitted is 4.4123 https://www.suspension.com/4.4123