unarchive In The Box of 4.5126 keyboard_arrow_down
- 1 - 5039 - Sway Bar Bushing
- 1 - Sway Bar Bushing
- 4 - 4802 - Endlink Grommets
- 4 - 4902 - Endlink Bushing Halves
- 2 - Center Metal Sleeves for 4902
- 1 - 911108 Formula 5 Prelube
- 1 - Installation Instructions - #17039
add_shopping_cart Suggested Parts 3keyboard_arrow_down
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 4.5126 | Front Sway Bar-Endlink Bushings - 28.57 mm | Ford F350
- 5 Star (9)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 4.5126
starstarstarstarstar" Review 1 Year Later "
The parts worked very well. Im completely satisfied.verified_user Verified Buyer - steven d neumann - . Energy Suspension 4.5126 - 5 out of 5
starstarstarstarstar" Everything i wanted, quality, and fitment "
Bushings were exactly what I wanted, easy installation and the truck feels a million times better.verified_user Verified Buyer - Jesse faller - . Energy Suspension 4.5126 - 5 out of 5
starstarstarstarstar" Excellent Product "
Research I had done had some of the bushing kits on the market with an improper fit for my application (97 F350). This kit was spot on with the two different bushing heights. However, the shorter bushing needed to be trimmed slightly (very easy with an utility knife) to fit in the bracket. I am pleased with the result, all those popping and clunking noises are gone.verified_user Verified Buyer - Shawn R Utz - . Energy Suspension 4.5126 - 5 out of 5
starstarstarstarstar" Excellent "
Complete, high-quality kit that fit my 1990 F-350 4X4 front sway bar exactly as it shouldverified_user Verified Buyer - Terry Robinson - . Energy Suspension 4.5126 - 5 out of 5