unarchive In The Box of 4.5146 keyboard_arrow_down
- 2 - 5405 22mm sway bar bushings
- 8 - 4902 end link bushings
- 4 - 15.10.342.39 (11/16”O.D.x1/2”I.D.x1.250 sleeve)
- 4 - 15.03.36.39 (1 3/4” O.D.x1/2”I.D.x.187 washer)
- 2 - 15.05.48.39 (12mm x1.75 x65mm bolt)
- 2 - 15.07.16.40 (12mmx 1.75 Nylock nut)
add_shopping_cart Suggested Parts 3keyboard_arrow_down
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
question_answer Ask us a Question
Energy Suspension Sway Bar BushingsEnergy Suspension Hyperflex Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty RubberA sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for Rear Sway Bar-Endlink Bushing - 22mm | Ford Expedition
- 5 Star (2)
- 4 Star (1)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 4.5146
starstarstarstarstar_border" Product was great. Instructions were nill. "
First off, I am not a mechanic. I was told by my neighbors (and my mechanic)this should be a piece of cake to install yourself. Yes, it was easy to install. But, it came with no instructions whatsoever and the instructions on-line did not match my car. 2000 Lincoln Navigator 4WD. The kit comes with 2 bolts but the linkage requires 4. The kit came with 4 metal insert tubes but if you use 2 of the bolts from the car (oversized to fit bushings without the insert) you only need 2. I had to decide which parts to use OEM and which to use from the kit.verified_user Verified Buyer - Troy Barnum - . Energy Suspension 4.5146 - 4 out of 5
starstarstarstarstar" Loved Them "
Made a night and day difference, had a lot of body roll. Much better handling on the on and off ramps.verified_user Verified Buyer - JENNY HANSON - . Energy Suspension 4.5146 - 5 out of 5
starstarstarstarstar" A+++++++++ "
Quick and Easy change out....Parts fit perfectly....Vastly improved the ride and control of the vehicle.......Thanksverified_user Verified Buyer - James L Vandewater - . Energy Suspension 4.5146 - 5 out of 5