unarchive In The Box of 9.5124 keyboard_arrow_down
- 2 - Sway Bar Bushing Bracket
- 2 - 5043 - Universal Sway Bar Bushing, 20mm
- 4 - Flat Washer
- 1 - 9.11108 - Formula 5 Prelube
add_shopping_cart Suggested Parts 3keyboard_arrow_down
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.


Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.


Product Reviews for Universal Sway Bar Bushings - 20mm
- 5 Star (12)
-
-
- 86%
-
- 4 Star (2)
-
-
- 14%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 9.5124
starstarstarstarstar" Review 2 Years Later "
The bushings have worked as expected. No complaints.
verified_user Verified Buyer - bob groen - . Energy Suspension 9.5124 - 5 out of 5starstarstarstarstar" Excellent "
Excellent fit and easy install. No raising of the car needed. The old bushings were very soft even though they didnt appear that way on the car. I had to open the bolt holes on the mount just a bit with a file.
verified_user Verified Buyer - Sam Kozaitis - . Energy Suspension 9.5124 - 5 out of 5starstarstarstarstar" Great upgrade! "
Just noticed the difference immediately. Only downside is they need more brackets options, You will need a rotary tool depending your vehicle. Mazda5 2010.
verified_user Verified Buyer - Christian M - . Energy Suspension 9.5124 - 5 out of 5starstarstarstarstar" Worked just as Designed good Fit "
I had to Fabricate a Backing Plate for the Sway-Bar Bushing due to the fact that the Factory had only provided for a one bolt anchoring. it was a very easy task & took Min time of Fabricate.\n\nIt sure tightened up the suspension, When I ordered the parts I also ordered 2 - Pt# 9.5107 but the 9.5124\nwas the correct fit so the 9.5107 were extras, the extra backing with the new plate mabe the S-B much better.\n\nTKS \nDexter Levy
verified_user Verified Buyer - Dexter Levy - . Energy Suspension 9.5124 - 5 out of 5