unarchive In The Box of 9.5126 keyboard_arrow_down
- 2 - Sway Bar Bushings (one for each side of the vehicle)
- 2 - Outer Brackets (one for each side of the vehicle)
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 9.5126 | Universal Sway Bar Bushings - 22mm (0.87 inch)
- 5 Star (6)
-
-
- 75%
-
- 4 Star (2)
-
-
- 25%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 9.5126
starstarstarstarstar" Review 2 Years Later "
Not many miles on them in the past 2 years. Stability is the same as brand new. No complaints.
verified_user Verified Buyer - R and D Auto and Cycle David S Beighle - . Energy Suspension 9.5126 - 5 out of 5starstarstarstarstar" good "
Used these Sway bar mount to modify my 280z rear suspension after some major modifications to drivetrain, worked well,I did not use OEM mount location, all custom fabrication, good price, good Parts....
verified_user Verified Buyer - David Jones - . Energy Suspension 9.5126 - 5 out of 5starstarstarstarstar_border" Work fine "
I have these on a 2001 Acura TL with an aftermarket rear sway bar, which eats bushings from any maker. I only get about 2 years from a set of bushings before replacement is needed. These are economical and work great when new.
verified_user Verified Buyer - Michael Skrzypczak - . Energy Suspension 9.5126 - 4 out of 5starstarstarstarstar_border" Solid and affordable; hard to beat! "
I have installed my third set of poly sway bar bushings and I am content in my decision. Overall, they are made very well, durable. Only thing is that these are universal so I couldn't use my OEM brackets. I don't like the finish on the energy brackets, black would be better. But regardless, you cannot go wrong with a set of these bushings or any energy bushings! I also bought a set of shocks boots from energy and couldn't be happier with the quality. Way better than OEM.
verified_user Verified Buyer - Mike - . Energy Suspension 9.5126 - 4 out of 5