Energy Suspension Bump Stops

Energy Suspension Bump Stops replace the original rubber with Hyperflex polyurethane which lasts much longer and protects your suspension components from banging into the frame.

Bump Stops act as a cushion between the frame and suspension components such as the axle or the control arms. When you hit a big bump or pothole your suspension and frame can come together quite suddenly and could cause damage and the bump stops are in place to prevent that. The originals are made of rubber which absorbs energy very well, but they can wear down with the force of continual impact.

Energy Suspension's Hyperflex Polyurethane is a much more durable material than rubber and can withstand impact much longer. These bump stops are Made in the USA and come with an exclusive Lifetime Warranty.

Part Number	Mounting Style	Height (inches)	Description
2.9101	Fit Over	-	Jeep style bump stop. Fits 1997-03 Jeep Wrangler. Must reuse all metal parts. 2 Bump Stops per set.
3.9101	Pull Through	2.625"	G.M. style pull-thru bump stop. Fits many 1978-88 G.M. RWD cars and trucks. 2 5/8" tall x 1 13/16" long x 1 15/16" wide. 2 bump stops per set.
3.9102	Pull Through	1.25"	G.M. style pull-thru bump stop. Fits many 1978-01 G.M. RWD cars and trucks. 1 1/4" tall x 1 1/2" long x 1 9/16" wide. 2 per set.
3.9103	Pull Through	2.625"	G.M. style pull-thru bump stop. Fits many 1978-88 G.M. RWD cars and trucks. 1 5/8" tall x 1 13/16" long x 1 15/16" wide. 2 bump stops per set.
9.9101	Threaded Stud	2.125"	All purpose bump stops for control arms, traction bars and leaf springs. Designed to be easily trimmed. 2 1/8" tall x 2" dia. 2 Bump Stops per set.
9.9102	Threaded Stud	0.6875"	Low profile button head bump stop for limited suspension height, such as control arms on mini trucks. 11/16" tall x 2" dia. 2 Bump Stops per set.
9.9103	Threaded Stud	1.5625"	Smaller general purpose bullet shaped bump stops, fits many control arms. 1 9/16" tall x 1 1/2" dia. 2 Bump Stops per set.
9.9104	Threaded Stud	4.5 ”	Designed with a large reinforced metal plate welded to a mounting plate and molded-in. 4 1/2" tall x 2 1/2" wide. 2 Bump Stops per set.
9.9109	Threaded Stud	2.5 ”	Low profile competition style bump stop. 2 1/2" tall x 4 1/2" long x 2 1/2" wide. 2 Bump Stops per set.
9.9116	Threaded Stud	1 ”	Button head bump stop 1" tall x 2" dia. 2 Bump Stops per set.
9.9117	Threaded Stud	1"	Flat head bump stop. 1" tall x 2 15/16" dia. 2 Bump Stops per set.
9.9118	Threaded Stud	0.875"	Low profile rectangular bump stop. 7/8" tall x 1 7/8" long x 1 3/8" wide. 2 per set.
9.9119	Threaded Stud	1.375"	Rectangular bump stop. 1 3/8" tall x 2 3/8" long x 2" wide. 2 per set.
9.9121	Threaded Stud	0.6875"	Low profile button head bump stops. 11/16" tall x 1 5/8" dia. 2 Bump Stops per set.
9.9132	Threaded Stud	0.375"	Ultra low profile button head bump stop. 3/8" tall x 2" dia., 1" long stud. 2 Bump Stops per set.
9.9135	Bolt Down	2.5"	Stepped style stop. 2 1/2" tall x 2 7/16" dia. Designed to accept 3/8" dia. socket head bolt. Hardware not included. Easily trimmed for custom fitting. 2 per set.
9.9136	Threaded Stud	2.00"	Square tapered style bump stop. 2" tall x 2" square. 7/8" long stud. 2 per set.
9.9137	Bolt Down	1.875"	2 bolt style, fits 1976-86 Jeep CJ5, 7 front and rear position 1 7/8" tall x 5" overall length x 1 3/4" wide. Designed to accept 3/8" dia. bolts with center to center of 4 1/4" max. to 4" min. Hardware not incl. 2 Bump Stops per set.
9.9138	Bolt Down	1.875"	Round head bump stop. 1 7/8" tall x 2 1/4" dia. Designed to accept 1/2" dia. socket head bolt. Hardware not included. 2 Bump Stops per set.
9.9143	Bolt Down	3.125"	Stepped style stop. 3 1/8" tall, 2 7/16" dia. Designed to accept 3/8" dia. socket head bolt. Hardware not included. Easily trimmed for custom fitting. 2 per set.
9.9148	Bolt Down	0.75"	Flat head pad 3/4" tall x 2 3/4" dia. Designed to accept 5/16" dia. socket head bolt. Hardware not included. 2 Bump Stops per set. Not to be used as a control arm or axle bump stop.
9.9149	Bolt Down	0.75"	Button head pad 3/4" tall x 2" dia. To accept 3/8" dia. socket head bolt. Hardware not included. 2 Bump Stops per set. Not to be used as a control arm or axle bump stop.
9.9150	Threaded Stud	2.00"	G.M. style bump stop. Fits many 1970-99 G.M. cars and trucks. 2" tall x 2 1/4" long x 1 1/16" wide. 1" long stud with a 5/16" dia. locating pin at 1" offset. 2 per set.
9.9151	Pull Through	1.5625"	Round pull -thru bump stop. Fits many G.M. vehicles 1970-99. Also fits 9/16" hole (1/8" thick) 1 9/16" tall x 1 13/16" dia. 2 per set.
9.9154	Threaded Stud	1.6875"	Single hump early GM style bump stop. Lower control arm bump stop direct replacement for: 1964-72 Chevelle, 1968-72 Nova and 1968-69 Camaro. Replaces OEM part no. 402410. 1 1/8" wide x 2 1/2" long x 1 11/16" tall.