unarchive In The Box of 4.7126 keyboard_arrow_down
- 2 - 8268 Bar Bushings
- 2 - Center Metal Sleeves for 8268
- 1 - 9.11108 Formula 5 Prelube Tube
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Energy Suspension Track Arm Bushings
Track arms, also known as panhard rods, are designed to enhance driver control and safety while cornering through several tasks: Keeping your suspension centered, reducing body roll, and increasing driver control. Now, even with the track arm installed your suspension can shift while you corner. The amount of shifting that occurs depends largely on the quality of bushings you have installed for your track arm.
OE track arm bushings are most commonly made of soft rubber. Rubber, while able to absorb a great deal of vibrations from the road, simply flexes too much to be a decent material for track arm bushings. Energy Suspension makes all of their track arm bushings out of Hyperflex polyurethane, a material that not only offers better performance than rubber, it'll also last much longer. Capable of withstanding great amounts of heat, pressure, and road contamination, these Hyperflex bushings are guaranteed to outlast and outperform the OE. Now, due to polyurethane's firmer nature, there is a good chance that your NVH may increase slightly once these bushings are installed. But, the increase in your control and safety while cornering is well worth it. Plus, Energy Suspension covers all of their track arm bushings with a two-year warranty handled in-house here at DST.
Product Reviews for Front Track Arm Bar Bushings - Ford Excursion - 4.7126
- 5 Star (9)
- 4 Star (2)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 4.7126
starstarstarstarstar" Solid well built part. "
These bushing worked great however getting them installed was a challenge as I do not have a shop press. Using a bench vise and some hose clamps did the trick.verified_user Verified Buyer - Eric Fromen - . Energy Suspension 4.7126 - 5 out of 5
starstarstarstarstar" Good quality "
Old ones was tough to get out. A hydraulic press will save you lots of time, on my application I had to reuse a inner sleeve and had to be ground down to fit inside bushing.verified_user Verified Buyer - Daniel Lewis - . Energy Suspension 4.7126 - 5 out of 5
starstarstarstarstar" A+ "
Easy to install, fit perfectlyverified_user Verified Buyer - Jamie Weil - . Energy Suspension 4.7126 - 5 out of 5
starstarstarstarstar" Good "
You really need to press these in. I cut them in half and preset them in. Good tight fit. Editors Note: Energy does not recommend modifying the bushings. This will void the warranty and affect the performance of the bushing.verified_user Verified Buyer - brandon fox - . Energy Suspension 4.7126 - 5 out of 5
compare_arrows Compare with Similar Parts
- This part
- Bushing Material: Polyurethane
- Bushing Material: Polyurethane