Filters

Ford F350 Super Duty 4wd 2003 Suspension Parts

LogoComplete Suspension Bushing Kit - Ford F350 4WD 99-04
Part Number: packagedeal054
Manufacturer: Energy Suspension

(?)
Black
Red
(?)

(?)
Exclusive for DST Customers
Price$233.52
LogoFront End Steering Rebuild Package Kit - Ford F250/F350 Super Duty 4WD 1999-2004
Part Number: dst-packagedeal012
Manufacturer: DST
Price$592.99
LogoU Joint Package - Ford F350 SuperDuty 4WD 99-04
Part Number: moog-ujoint-packagedeal002
Manufacturer: MOOG
Price$192.02
LogoU Joint Package - Ford F-350 4WD 99-04
Part Number: moog-ujoint-packagedeal491
Manufacturer: MOOG
Price$192.02
LogoTransmission Mount
Part Number: 4.1142
Manufacturer: Energy Suspension
Max mounting dimensions on cross member side is 3.312 Inches center to center

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$89.58
LogoTransmission Mount
Part Number: 4.1143
Manufacturer: Energy Suspension
Max mounting dimensions on cross member side is 2.375 Inches center to center

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$105.37
LogoBody Mount Bushings and Radiator Support Bushings - Super Duty Crew Cab
Part Number: 4.4120
Manufacturer: Energy Suspension
Fits Super Duty - Crew Cab only

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$253.84
LogoBody Mount and Radiator Support Bushings for Ford Super Duty
Part Number: 4.4121
Manufacturer: Energy Suspension
Fits Super Duty - Regular and Super Cabs only.
For Crew Cab models, use the 4.4120 Body Mount Set

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$184.69
LogoAxle Pivot Bushings
Part Number: 4.3121
Manufacturer: Energy Suspension

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$28.49
LogoFront Leaf Spring Bushings - Excludes Dually Models
Part Number: 4.2148
Manufacturer: Energy Suspension

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$99.06
LogoFront Frame Shackle Bushings
Part Number: 4.2152
Manufacturer: Energy Suspension

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$32.40
LogoRear Leaf Spring Bushings - Excludes Dually Models
Part Number: 4.2147
Manufacturer: Energy Suspension

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$108.08
LogoRear Frame Shackle Bushings
Part Number: 4.2153
Manufacturer: Energy Suspension

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$34.54
LogoFront Axle Bump Stops - 2 Inch - Pair
Part Number: 4.9103
Manufacturer: Energy Suspension
Replacement for OE Bump Stops. 2 Inch Height

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$114.09
LogoFront Sway Bar Frame and Endlink Bushings - 32mm (1.26 inch) Sway Bar - 1.5 Inch Endlink Eyes
Part Number: 4.5186
Manufacturer: Energy Suspension
Includes bushings for approximately 1.5 Inch Endlink Eyes. Vehicles with smaller (approx) 1.15 Inch Endlink Eyes will use 4.5192 instead. These vehicles are typically early 99 models (March/1999 and earlier approx)Use 4.5192 Instead! Only Fits 1 1/4 inch Bar

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$63.96
LogoFront Sway Bar Frame and Endlink Bushings - 32mm (1.26 inch) Sway Bar - 1.15 Inch Endlink Eyes
Part Number: 4.5192
Manufacturer: Energy Suspension
This set fits Models with approximately 1.15 Inch Endlink Eyes.
Fits 99 models made on or before 3/99.
If you have eyes of approximately 1.5 inch you will instead use 4.5186
Only Fits 1 1/4 inch Bar

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$64.39
LogoFront Track Arm Bushings
Part Number: 4.7126
Manufacturer: Energy Suspension

(?)
Black
Red

(?)
Exclusive for DST Customers
Price$26.38

Filters

LogoFront Shock Absorber - Gas-Magnum
Part Number: monroe-34686
Manufacturer: Monroe
Price$57.29
LogoFront Shock Absorber - Monroe Reflex
Part Number: monroe-911195
Manufacturer: Monroe
Price$71.19
LogoFront Shock Absorber - Monro-Matic PLUS
Part Number: monroe-32358
Manufacturer: Monroe
Price$38.42
LogoRear Shock Absorber - Monro-Matic Plus
Part Number: monroe-32359
Manufacturer: Monroe
Price$38.42
LogoRear Shock Absorber - Monro-Matic Plus
Part Number: monroe-32386
Manufacturer: Monroe
Price$38.42
LogoRear Shock Absorber - Monroe Reflex
Part Number: monroe-911196
Manufacturer: Monroe
Price$73.12
LogoRear Shock Absorber - Gas-Magnum
Part Number: monroe-34687
Manufacturer: Monroe
Price$58.52
LogoRear Shock Absorber - Gas-Magnum
Part Number: monroe-34964
Manufacturer: Monroe
Price$58.37
LogoRear Shock Absorber - Monroe Reflex
Part Number: monroe-911039
Manufacturer: Monroe
Price$59.36
LogoFront Strut Bar To Chassis Bushing Kit
Part Number: spf0001k
Manufacturer: SuperPro
  • 1/1981 - 1994
  • Strut Bar To Chassis Mount Kit

(?)
Accept Terms (8-12 weeks)
Price$71.99
LogoFront Strut Bar To Chassis Mount Kit
Part Number: spf0042k
Manufacturer: SuperPro
  • 1974 - 11/1975
  • Strut Bar To Chassis Mount Kit

(?)
Accept Terms (8-12 weeks)
Price$71.99
LogoFront Strut Bar To Chassis Mount Kit
Part Number: spf0045k
Manufacturer: SuperPro
  • Suits 12/1975 - 5/1979
  • Strut Bar To Chassis Mount Kit

(?)
Accept Terms (8-12 weeks)
Price$66.99
LogoFront Strut Bar To Chassis Mount Kit
Part Number: spf0069k
Manufacturer: SuperPro
  • 1970 to 1973
  • Strut Bar To Chassis Mount Kit

(?)
Accept Terms (8-12 weeks)
Price$65.99
LogoLeaf Spring Shackle
Part Number: moog-k150417
Manufacturer: MOOG
Price$80.37
LogoRear Sway Bar Frame Bushings - 19.5mm (0.75 Inch)
Part Number: moog-k80071
Manufacturer: MOOG
Fits a 3/4 Inch Sway Bar Only. Includes a Pair of Matching Bushings
Price$23.72
LogoRear Sway Bar Frame Bushings - 31.75 mm (1.25 inch)
Part Number: moog-k80072_rear
Manufacturer: MOOG
Includes a Pair of Matching Bushings. Fits a 1-1/4 Inch Bar Only
Price$18.54
LogoRear Sway Bar Frame Bushings - 22.5mm (0.88 Inch)
Part Number: moog-k8651
Manufacturer: MOOG
Fits Chassis Cab with 7/8 Inch Sway Bar. Includes a Pair of Matching Bushings
Price$23.11
LogoRear Sway Bar Frame Bushings - 29.97mm (1.18 Inch)
Part Number: moog-k8656-drw
Manufacturer: MOOG
Fits DRW with Ford Axle and a 1-3/16 Inch Sway Bar. Includes a Pair of Matching Bushings
Price$22.02
LogoRear Sway Bar Frame Bushings - 29.97mm (1.18 Inch)
Part Number: moog-k8656-rear
Manufacturer: MOOG
Fits SRW with 156 Inch/158 Inch/ or 182 Inch Ford Axle and a 1-3/16 Inch Sway Bar. Includes a Pair of Matching Bushings
Price$27.00
LogoFront Sway Bar End Link - Passenger Side
Part Number: moog-k80273
Manufacturer: MOOG
  • Includes One Complete Link. Fits Passenger Side Only
  • With 351.5 mm overall length; you must replaces both left and right at the same time. Bent type
  • Price$73.63
    LogoFront Sway Bar End Link - Driver Side
    Part Number: moog-k80274
    Manufacturer: MOOG
  • Includes One Complete Link
  • With 351.5 mm overall length; you must replaces both left and right at the same time.
  • Bent type
  • Price$73.63
    LogoRear Endlink Repair Bushings
    Part Number: moog-k80086
    Manufacturer: MOOG
    Fits left or right side. Fits Models with 9900LB GVW and Over
    Price$21.15
    LogoRear Sway Bar End Link - 4WD Dually
    Part Number: moog-k750261
    Manufacturer: MOOG
    Fits 4WD Dually Models. Includes One Complete Link. Center to Center Length 13.7 Inch. Fits Models under 9900 Lb. GVW. Models over 9900 Lb GVW will use K80268 Center to Center Length 7.93 Inch
    Price$44.08
    LogoFront Track Bar
    Part Number: moog-ds80797
    Manufacturer: MOOG
    For F-550 & F-250 from 3/22/99 with 21.5mm eyelet holes
    Price$115.22
    LogoFront Lower Ball Joint
    Part Number: dst-k8607t
    Manufacturer: DST
    Price$49.43
    LogoFront Upper Ball Joint
    Part Number: dst-k80026
    Manufacturer: DST
    Price$44.52
    LogoFront Outer Tie Rod End - At Pitman Arm
    Part Number: dst-es3427t
    Manufacturer: DST
    Price$41.37
    LogoFront Outer Connecting Tie Rod End - Passenger Side
    Part Number: dst-ds1439
    Manufacturer: DST
    Price$140.55
    LogoFront Outer Tie Rod End - Driver Side
    Part Number: dst-es3423
    Manufacturer: DST
    Price$63.41
    LogoFront Inner Tie Rod End - At Right Hand Connecting Tie Rod
    Part Number: dst-ds1438
    Manufacturer: DST
    Price$119.09
    LogoTie Rod Adjusting Sleeve - Driver Side - (Steering Arm to Steering Arm)
    LogoCam/Cast Sleeve Bushing Assortment (9)
    Part Number: spc-23130
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23130 Set Contains 1 each: 23131, 23132, 23133, 23134, 23135, 23136, 23137, 23138, 23139
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$165.87
    LogoCaster/Camber Bushing - 1/4 degrees
    Part Number: spc-23131
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23131 .25 degree (1/4 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$17.09
    LogoCaster/Camber Bushing - 1/2 degrees
    Part Number: spc-23132
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23132 .50 degree (1/2 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$17.09
    LogoCaster/Camber Bushing - 3/4 degrees - 4WD
    Part Number: spc-23133
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23133 .75 degree (3/4 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    Price$17.09
    LogoCaster/Camber Bushing - 1 degrees - 4WD
    Part Number: spc-23134
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23134 1.00 degree (1 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$17.09
    LogoCaster/Camber Bushing - 1 1/4 degrees - 4WD
    Part Number: spc-23135
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23135 1.25 degree (1-1/4 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$20.09
    LogoCaster/Camber Bushing - 1 1/2 degrees - 4WD
    Part Number: spc-23136
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23136 1.50 degree (1-1/2 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$20.09
    LogoCaster/Camber Bushing - 1 3/4 degrees - 4WD
    Part Number: spc-23137
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23137 1.75 degree (1-3/4 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$20.09
    LogoCaster/Camber Bushing - 2 degrees - 4WD
    Part Number: spc-23138
    Manufacturer: SPC
    • Change camber, caster or both at the same time with these sleeves.
    • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
    • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
    • To adjust, the sleeve may be lifted and rotated 1/8 turn.
    • 23138 2.00 degree (2 degree)
    • Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    Price$20.09
    LogoCaster/Camber Bushing - 1/4 degrees
    Part Number: spc-23181
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23181 2WD Adjust .25 degree - 4WD Adjust .20 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket

    (?)
    Accept Terms (5-8 weeks)
    Price$10.05
    LogoCaster/Camber Bushing - 1/2 degrees
    Part Number: spc-23182
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23182 2WD Adjust .50 degree - 4WD Adjust .40 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket

    (?)
    Accept Terms (5-8 weeks)
    Price$10.05
    LogoCaster/Camber Bushing - 1 1/2 degrees
    Part Number: spc-23186
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23186 2WD Adjust 1.50 degree - 4WD Adjust 1.10 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket

    (?)
    Accept Terms (5-8 weeks)
    Price$10.05
    LogoCaster/Camber Bushing - 2 degrees
    Part Number: spc-23188
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23188 2WD Adjust 2.00 degree - 4WD Adjust 1.40 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket
    Price$10.05
    LogoCaster/Camber Bushing - 2 1/4 degrees
    Part Number: spc-23189
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23189 2WD Adjust 2.25 degree - 4WD Adjust 1.60 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket

    (?)
    Accept Terms (5-8 weeks)
    Price$10.05
    LogoCaster/Camber Bushing - 2 1/2 degrees
    Part Number: spc-23190
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23190 2WD Adjust 2.50 degree - 4WD Adjust 1.80 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket
    Price$10.05
    LogoCaster/Camber Bushing - 3 degrees
    Part Number: spc-23192
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23192 2WD Adjust 3.00 degree - 4WD Adjust 2.25 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket

    (?)
    Accept Terms (5-8 weeks)
    Price$19.71
    LogoCaster/Camber Bushing - 3 1/4 degrees
    Part Number: spc-23193
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23192 2WD Adjust 3.00 degree - 4WD Adjust 2.25 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket
    Price$19.71
    LogoCaster/Camber Bushing - 3 1/2 degrees
    Part Number: spc-23194
    Manufacturer: SPC
    • These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks.
    • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present.
    • Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve.
    • Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
    • Part Number 23194 2WD Adjust 3.50 degree - 4WD Adjust 2.50 degree
    • To save time during alignment, use the 23199 zero sleeve to determine initial readings.
    • Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket
    Price$19.71
    LogoAdjustable Truck Sleeve
    Part Number: spc-24130
    Manufacturer: SPC
    • This sleeve can adjust camber and/or caster in a large variety of combinations.
    • Replaces up to 24 stock sleeves.
    • Adjustment range: Cam./Cas. ± .75 degree to ± 2.75 degree
    • Minimum Adjustment ± .75 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Recommended Tools: 74500 - Adj. Sleeve Wrench
    Price$34.05
    LogoAdjustable Truck Sleeve
    Part Number: spc-24180
    Manufacturer: SPC
    • This sleeve can adjust camber and/or caster in a large variety of combinations.
    • Replaces up to 9 stock 23180 sleeves
    • Adjustment range: Cam./Cas. ± .50 degree to ± .2.25 degree
    • Minimum Adjustment ± .50 degree
    • Installation time: .5 hr/side
    • Required: 1 per wheel
    • Suggested Tools: 74400 - Adj. Sleeve Wrench 74500 - Adj. Sleeve Wrench
    Price$31.20
    LogoSteering Stabilizer - Monro-Magnum
    Part Number: monroe-sc2961
    Manufacturer: Monroe
    Price$43.51
    LogoPitman Arm - with 36 Tooth Design
    Part Number: moog-k80796
    Manufacturer: MOOG
    Fits Models with 36 Tooth Design with monobeam front axle
    Price$64.86
    LogoFront Universal Joint - Qty 1
    Part Number: moog-271
    Manufacturer: MOOG
  • K30 1977-1986 - Front Axle Shaft both Left and Right Outer
  • K3500 1988-1989 - Front Axle Shaft both Left and Right Outer
  • V30 1987-1988 - Front Axle Shaft both Left and Right Outer
  • V3500 1989-1991 - Front Axle Shaft both Left and Right Outer
  • Ram 2500 1994-2002 4WD - Front Axle Shaft both Left and Right Outer
  • Ram 3500 1994-2002 4WD - Front Axle Shaft both Left and Right Outer
  • W200 1977-1980 - Front Axle Shaft both Left and Right Outer
  • W250 1981-1993 - Front Axle Shaft both Left and Right Outer
  • W300 1977-1980 - Front Axle Shaft both Left and Right Outer
  • W350 1981-1993 - Front Axle Shaft both Left and Right Outer
  • Excursion 2000-2004 - Front Axle Shaft Left Outer
  • Excursion 2000-2005 - Front Axle Shaft Right Outer
  • F250 1978-1979 - Front Axle Shaft both Left and Right Outer
  • F250 Super Duty 2005-2015 - Front Axle Shaft both Left and Right Outer, Axle At Wheels
  • F350 1979-1997 4WD - Front Axle Shaft both Left and Right Outer
  • F350 Super Duty 1999-2015 4WD - Front Axle Shaft both Left and Right Outer
  • F450 Super Duty 1999-2015 4WD - Front Axle Shaft both Left and Right Outer
  • F550 Super Duty 1999-2015 4WD - Front Axle Shaft both Left and Right Outer
  • K35 1977-1978 - Front Axle Shaft both Left and Right Outer
  • K3500 1979-1989 - Front Axle Shaft both Left and Right Outer
  • V3500 1987-1991 - Front Axle Shaft both Left and Right Outer
  • Price$95.53
    LogoFront Wheel Bearing and Hub Assembly
    Part Number: moog-515020
    Manufacturer: MOOG
    Price$359.44
    LogoFront Wheel Bearing and Hub Assembly
    Part Number: moog-515056
    Manufacturer: MOOG
    Price$330.74
    LogoFront Wheel Bearing and Hub Assembly
    Part Number: moog-515057
    Manufacturer: MOOG
    Price$405.51
    LogoOpen End Wrench - 1-1/2 Inch
    Part Number: spc-74400
    Manufacturer: SPC
    • These wrenches make presetting the new adjustable truck sleeves, 24120, 24130, 24160, 24180, easier for the installer.
    • When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the outer sleeve body.
    • 1-1/2 Inch Open end for 24160 - Holds the inner sleeve in position.
    • For 24180 - Holds the outer eccentric sleeve for adjustment.
    Price$30.44
    LogoFord OE Sleeve Puller
    Part Number: spc-77880
    Manufacturer: SPC
    • This sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve.
    • Heat treated high strength steel. Single-unit design with no loose parts.
    • APPLICATIONS: Ford: Twin I-Beam w/upper and lower ball joints.
    • CAUTION: Not for use with impact wrenches (air tools).
    Price$135.67

    Ford F350 Super Duty 4wd 2003 | All Suspension Parts

    Dont just buy replacement suspension parts for your Ford F350 Super Duty 4wd 2003, buy the absolutely BEST Ford F350 Super Duty 4wd 2003 suspension parts. At EnergySuspensionParts.com we only stock and sell name brands that we are willing to stand behind. You can find the best suspension parts for your Ford F350 Super Duty 4wd 2003 at the best prices at EnergySuspensionParts.com. So whether you need to replace your worn and sagging suspension bushings with performance replacements, or you are upgrading your OE suspension with larger sway bars and sway bar bushings - EnergySuspensionParts.com is where you'll find them.
    Ball Joints and Ball Joint Parts

    Ball Joints and Ball Joint Parts | Ford F350 Super Duty 4wd 2003

    Body and Subframe Mounts

    Body and Subframe Mounts | Ford F350 Super Duty 4wd 2003

    Drivetrain Parts

    Drivetrain Parts | Ford F350 Super Duty 4wd 2003

    Motor and Transmission Related Parts

    Motor and Transmission Related Parts | Ford F350 Super Duty 4wd 2003

    Shocks Struts and Related Parts

    Shocks Struts and Related Parts | Ford F350 Super Duty 4wd 2003

    Sway Bars and Sway Bar Parts

    Sway Bars and Sway Bar Parts | Ford F350 Super Duty 4wd 2003

    Tools

    Tools | Ford F350 Super Duty 4wd 2003

    Universal

    Universal | Ford F350 Super Duty 4wd 2003


    Don't see what you needed?

    Energy Suspension wants to know...
    "What do your customers want us to make for them?"
    Tell us and we'll make sure they hear your vote!