unarchive In The Box of packagedeal032 keyboard_arrow_down
- Front Control Arm Bushings - 16.3103
- 4 - 3280 - Upper Control Arm Bushings
- 4 - 2271 - Lower Control Arm Bushing Halves
- 2 - 3281 - Center Spacer Bushings for 2271
- 4 - Center Metal Sleeves for 3280
- 2 - Center Metal Sleeves for 2271
- 1 - Small Formula 5 Prelube Tub
- 1 - Installation Instructions # 17139
- Front Strut Arm Bushings - 16.7102
- 4 - 7095 - Strut Rod Bushings
- Front Shock Mount Bushings - 16.8102
- 4 - 2272 - Lower Bushing Halves (Mount in the center of the lower control arm)
- 2 - Center Metal Sleeves for 2272
- 4 - 8096 Upper Bushings (Mount at the top of the shock / spring assembly)
- 4 - 9.11108 Formula 5 Prelube Tubes
- 1 - Installation Instructions # 17162
- Rear Control Arm Bushings - 16.3109
- 8 - 2301 - Outer Bushing Halves
- 4 - 3288 - Center Bushing Spacers
- 4 - Center Metal Sleeves for 2301, 3288
- 2 - 9.11109 Formula 5 Prelube Tubes
- 1 - Installation Instructions # 17140
- Rear Shock Mount Bushings - 16.8103
- 4 - 2270 - Lower Shock Mount Bushings (At Control Arm)
- 4 - 8096 - Shock Mount Bushing Halves
- 2 - Center Metal Sleeves
- 911108 Formula 5 Prelube
- 1 - Installation Instructions - #17163
- Rear Trailing Arm Bushings - 16.7106
- 2 - 3317 - Trailing Arm Bushings
- 1 - 9.11108 Formula 5 Prelube Tube
- 1 - Installation Instructions # 17339
- Front Sway Bar Bushings - 16.5112
- 2 - 5364 - 15mm Sway Bar Bushings
- 1 - 9.11108 Formula 5 Prelube Tube
- 1 - Installation Instructions #17039
- Front Sway Bar Endlinks - 16.8104
- 8 - 8072 Endlink Grommets
- 8 - Endlink Washers
- 2 - Main Endlink Bolts
- 2 - Center Spacers
- 2 - Nylock Nuts
- Rear Sway Bar Bushings - 16.5110
- 2 - 18mm Sway Bar Bushings
- 1 - 9.11108 Formula 5 Prelube Tube
- 1 - Installation Instructions #17039
- Outer Tie Rod End Boots - 9.13103
- 2 - 13003 - Tie Rod Dust Boots
- Ball Joint Dust Boots - 16.13101
- 2 - 13001 Lower Ball Joint Boots
- 2 - 13003 Upper Ball Joint Boots
- Shifter Bushings - 16.1101
- 1 - 1032 - Bushing a Transmission
- 1 - 1033 - Bushing at Shifter (same for B and D series Engines)
- 1 - Installation Instructions # 17161
- Motor Mount Inserts - Left and Right - 85068507
- Upper Left Mount Inserts
- Upper Right Mount Inserts
- Motor Mount Inserts - Front and Rear - 16.1104
- 1 - 1053 - Front Mount - Drivers Side
- 1 - 1054 - Front Mount - Passenger Side
- 2 - 1055 - Rear Mount, Driver and Passenger Side
- 2 - Outer Metal Washers for 1055
- 1 - Installation Instructions # 17322
add_shopping_cart Suggested Parts 6keyboard_arrow_down
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
3 - 5ML High Performance Grease by Energy
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for packagedeal032 | Honda CRX VT Suspension Bushings Replacement Kit
- 5 Star (0)
-
-
- 0%
-
- 4 Star (1)
-
-
- 100%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension packagedeal032
starstarstarstarstar_border" Good Kit. Add These 2 Parts. Vtec Models Should Read about 2 Parts. "
I see one real problem in this package. The 16.8104G endlink bushings are not good for a Crx Vtec. A non-vtec yes but a Vtec no. You can only use the endlink bushings, not the entire link. I am not sure if the 16.10101G fits the Vtec model correctly. Other than this, It is good for the for crx vtec and non vtec. Also my advice is to purchase the 2 Parts: 8307 - Rear Upper Control Arm Bushings and 8309 - Rear Compensator Arm Bushings in order to change all the bushes. After that, It is perfect. Long road in Crx.
verified_user Verified Buyer - Daujat Florent - . Energy Suspension packagedeal032 - 4 out of 5
