unarchive In The Box of packagedeal007 keyboard_arrow_down
- Kit 3.3106 - Front Control Arm Bushings
- 2 of 15.12.17.01 - 3009 "C" Shell Assembly
- 2 of 15.12.18.01 - 3010 "B" Shell Assembly
- 2 of 15.12.19.01 - 3012 "G" Shell Assembly
- 2 of 15.12.34.01 - 3013 "H" Shell Assembly
- 2 of 9.11108 - Grease, 5 ml
- Kit 9.8117 - Front Sway Bar Endlinks
- 8 - End Link Bushing
- 8 - Dished Washer
- 2 - Metal Sleeve
- 2 - Hex Cap Bolt
- 2 - Nylon Hex Nut
- Kit 3.9102 - Front Upper Bump Stops
- 2 - 6093 - Universal Bump Stop, Pull Through
- Kit 9.9150 - Front Lower Bump Stops
- 2 - 6139 - Universal Bump Stop
- 2 - Nylon Hex Nut
- Kit 3.4142 - Frame Mount Bushings
- Body mount set: 3-4142
- 2 - 4001 bushings (bottom, position #1)
- 2 - 4002 bushings (top, position #1)
- 2 - 4003 bushings (top, position #3)
- 4 - 4004 bushings (bottom, position #2 & #3)
- 2 - 4005 bushings (top, position #2)
- 2 - 15.02.29.39 (1.282" O.A.L. Shells)
- 1 - 17235 installation instructions
- 2 - 15.02.30.39 (1.495" O.A.L. Shells)
- 2 - 15.02.31.39 (1.410" O.A.L. Shells)
- 4 - 15.03.14.39 (.500"I.D.x 2.500"O.D. Washers)
- 4 - 15.03.24.39 (.625"I.D.x 2.500"O.D. Washers)
- 2 - 15.07.03.40 (1/2"-13 Nylock nuts)
- 2 - 15.05.41.39 (1/2"-13 x 2 1/2" grd. 5 bolts)
- 4 - 15.05.42.39 (5/8"-11 x 3" grd. 5
- Kit 9.13128 - Ball Joint Dust Boots
- 2 of 13007 - Ball Joint Dust Boot, Large
- 2 of 13001 - Ball Joint Dust Boot, Small
- Kit 9.13101 - Tie Rod End Boots
- 2 - 13001 - Tie Rod Dust Boot
- Kit 3.2103 - Rear Leaf Spring Bushings
- 4 - 2013 - Larger Bushing Halves
- 8 - 2015 - Smaller Bushing Halves
- 2 - Center Metal Sleeves for 2013
- Formula 5 Prelube Tubes
- Kit 3.6111 - Rear Leaf Spring Pads
- 2 of 1909 - Rear Leaf Spring Pad
- 2 of 0909 - Rear Leaf Spring Pad
- 2 of Metal Sleeves
- Kit 3.9102 - Front Upper Bump Stops
- 2 - 6093 - Universal Bump Stop, Pull Through
- Front Sway Bar Bushings - Optional
- Transmission Mount - Optional
- Rear Sway Bar Bushings - Optional
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for packagedeal007 | Complete Suspension Bushing Kit | Chevy Camaro 80-81
- 5 Star (2)
-
-
- 67%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 33%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension packagedeal007
starstarstarstarstar" Very Impressed "
The ordering ease and delivery speed was excellent. The front end is done so far and all went in well. As my Z28 is a project, the rest of the kit will go in soon. I will definitely be buying these bushing for my 64 Rivi. Good web pricing compared to shops in Canada Thanks
verified_user Verified Buyer - Dave C Coquitlam - . Energy Suspension packagedeal007 - 5 out of 5starstarstarstar_borderstar_border" good "
Instructions on what numbers are what would've been great. Make sure to grease the outside of the inner sleeve of the control arm bushings; meaning you've got to push the inner sleeve out of the bushing before installation. Much less squeaking. Quality was good, looks great. Having issues establishing which body mounts are which. Great shipping time too; swear it was only 3 days!
verified_user Verified Buyer - Daniel Stevens - . Energy Suspension packagedeal007 - 3 out of 5starstarstarstarstar" excellent "
The car handles like it's on rails now. Very predictable and they don't squeak!!! I replaced all the suspension components, so why go with somepy rubber bushings? I believe in doing it once and doing it right. Best performance for the money..
verified_user Verified Buyer - Robert Antila - . Energy Suspension packagedeal007 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- How do I know which front and rear sway bar bushings to order?
- Answer:
- The first thing you will need to do is measure the diameter of your sway bar. Once you have that information you can go through the list on the drop down to make your selection. They are listed by part numbers. Each part number is a different size bu ushing. If you need additional help just call us at 1-888-406-2330. One of our customer service representatives will be happy to help. ...see more